What correct fuel pump rod assemble to use 1 Attachment(s)
What fuel pump rod needed 1949-53 Merc engine and vendor to get it--- it looks like it was a 3/8" tube or rod that was in originally before it was taken apart cooked out and part was lost
|
Re: correct fuel pump rod That depends on the block. The early 8BA blocks did not have a bushing and used a slightly larger diameter fuel push rod. I believe that rod has a "skirt" surrounding it that contacts the block when the rod is at the lowest position. So check for the bushing in the block before you buy a rod. If you can't find anything PM me I think I have a couple.
|
Re: What correct fuel pump rod assemble to use Ordered a new set-up from MAC VP, he told me what I all need and he had the parts-- first time I had any dealings with him and was very IMPRESSED a real gentlemen and took time to explain-- Thanks
|
All times are GMT -5. The time now is 03:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.