52 Ford flathead fuel pump push rod
 

when I bought this car, the mechanical fuel pump and push rod was replaced with an elec. pump. My question is ; how do I install a new push rod so I can put the mechanical pump back on car in line w/elec pump ? Can I just insert it down through the top , assuming there is a bushing in place. Does it thread on to something at the cam or just ride there ? How do I know that it is all the way down?

Thanks for any and all help.

Bob Rinker

Re: 52 Ford flathead fuel pump push rod
 

Bob,

You posted in a section intended for questions to the editors about the site. You need to post it here: https://www.fordbarn.com/forum/forumdisplay.php?f=4

Good luck and welcome.

Charlie Stephens