Spin on oil filter for Y-block Were any Y-blocks factory built for “spin on” oil filters?
Thanks, Steve |
Re: Spin on oil filter for Y-block no.
|
Re: Spin on oil filter for Y-block Yes -
1957/ , but not on all models or trucks |
Re: Spin on oil filter for Y-block they were not built for a spin on filter .an adapter was used.
|
Re: Spin on oil filter for Y-block 1 Attachment(s)
They came factory assembly with the adapter and spin-on filter. The adapter was installed 1957/ or offered as an over-the counter kit.
EDIT - Should read factory assembly came with assembly parts to use SPIN-ON filter. The assembly parts were then released in kit form (although the individual service parts could be bought separately) for prior 1957 assembly retro-fit. |
Re: Spin on oil filter for Y-block Somebody at a Ford dealer told me back in the '70's that the spin-on version was made available in 1957.
But I can tell you this; I must have a really old one, because it is stamped of at least 16 gage or heavier metal. You'd need to swing a hammer pretty hard to make a dent in this one. The newer conversion plates are thin and you gotta be real careful installing them. |
Re: Spin on oil filter for Y-block Starting in 1957, as the others said, spin on filters were original equipment. On cars and Tbirds, trucks???
|
Re: Spin on oil filter for Y-block 2 Attachment(s)
Not TRUCK until 1963. They could be retro-fitted with the adapter kit.
|
Re: Spin on oil filter for Y-block The kit was orginally a Ford tractor part.
|
Re: Spin on oil filter for Y-block Quote:
The kit also fitted some tractor engines. |
Re: Spin on oil filter for Y-block Quote:
What year tractor? Spin-on filters were OEM on 1957 cars.. |
Re: Spin on oil filter for Y-block I'm thinking '54-'55. I rember buying them in the early '60's for a '56 Ford I had.
|
All times are GMT -5. The time now is 01:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.