The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Fan belt size (https://www.fordbarn.com/forum/showthread.php?t=242606)

1930.68B 04-14-2018 03:24 PM

Fan belt size
 

I would like to know the correct size of the Model A fan belt. We are using the original generator and water pump pulleys. They are in all the Model A parts catalogs but the shipping doubles the cost of the belt.
Thanks

CarlG 04-14-2018 04:26 PM

Re: Fan belt size
 

Bx40

Synchro909 04-14-2018 05:24 PM

Re: Fan belt size
 

Ditto B 40

wrndln 04-14-2018 05:32 PM

Re: Fan belt size
 

After looking up B 40 fan belts on eBay, it appears the belt is 43" in diameter. It is strange the B 40 would be 43", verses 40" like the name. Is the correct belt 43"?
Rusty Nelson

Synchro909 04-14-2018 06:00 PM

Re: Fan belt size
 

Quote:

Originally Posted by wrndln (Post 1617715)
After looking up B 40 fan belts on eBay, it appears the belt is 43" in diameter. It is strange the B 40 would be 43", verses 40" like the name. Is the correct belt 43"?
Rusty Nelson

That sounds weird! One time, when I was too far from another supply, I used a B43 to get me out of trouble. It was as close as I could get. To tension it, the generator was so far out to the left that the belt touched the rubber part lower water outlet near the radiator. I laid a piece of aluminium under the hose clip to prevent it wearing through and replaced the belt some 4,000 miles later.

JOHN CT 04-14-2018 07:21 PM

Re: Fan belt size
 

D&D PowerDrive B40 NAPA AUTOMOTIVE Replacement Belt https://www.amazon.com/dp/B00NUQE4I0..._eQP0Ab9R5MV51


This is the belt I got from amazon. It works fine for me. It’s been on for a few years.

CarlG 04-14-2018 10:19 PM

Re: Fan belt size
 

The "X" in the part number I mentioned above (post #2) is a cogged belt. The 43" that Rusty referred to in post #4 is the Outside diameter. I suspect that the "40" refers to the inside diameter, although I don't have one handy to measure to verify that.

Tom Wesenberg 04-14-2018 10:43 PM

Re: Fan belt size
 

Add things to your parts order, and buy from a dealer so you get the correct belt. The belt angle needs to be correct as well as the width and length. The belt I bought from Bratton's in the 90's for my 28 still looks like new.

Dodge 04-15-2018 12:57 AM

Re: Fan belt size
 

The Napa one doesn’t fit very well. I and several othe people have had trouble with it.
The ones I have ordered from Snyders fit perfect.

Manuel 04-16-2018 01:52 AM

Re: Fan belt size
 

What about B fan belts. Are they the same as the A?

Manuel in Oz

Badpuppy 04-16-2018 05:16 PM

Re: Fan belt size
 

Nope - http://www.biedlers-belts.com/single...r-ii-belt.html

Manuel 04-17-2018 11:48 PM

B Fan belt size?
 

The chart doesn't show makes & models BP. What diameter/size is the B belt?

Manuel in Oz

BILL WILLIAMSON 04-18-2018 05:10 PM

Re: Fan belt size
 

To be SAFE, get the one it calls for & one slightly shorter & one slightly longer! It's a LOOOOOONG walk to PEP BOYS!
Bill Tired

ursus 04-18-2018 05:40 PM

Re: Fan belt size
 

Quote:

Originally Posted by Manuel (Post 1618240)
What about B fan belts. Are they the same as the A?

Manuel in Oz

A and B belts are the same size and, the same as used for 1940's era Chevrolets.

Manuel 04-21-2018 01:15 AM

Re: Fan belt size
 

Thanks Ursus. Never knew that....

Manuel in Oz


All times are GMT -5. The time now is 05:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.