1931 ccpu
 

I have a 1931 CCPU and need the dimensions for the door glass.

Re: 1931 ccpu
 

Service Bulletins book.

Re: 1931 ccpu
 

According to the Body Parts List the glass for the 82-B is A-45958
page 250 of the Service Bulletins.

Bob

Re: 1931 ccpu
 

Hey Glenn if you come up with those dimensions let me know! Thanks

Re: 1931 ccpu
 

You may want to check with local auto glass shops as some may have old patterns lying around.
I had to replace an original drivers window in my 82A CCPU after it broke going down a pothole filled road here in the San Diego area - I called around and an auto glass company up in Anaheim had patterns and they made up one for me which works great - after I figured out - on the 4th try which way it was to be installed - due to the taper.

Re: 1931 ccpu
 

A-45958 is shown here...

http://www.mafca.com/downloads/Servi...p250_Glass.jpg

Re: 1931 ccpu
 

Those drawings are for a 1928 CCPU. The man owns a 1931 CCPU. Different animal.......

Re: 1931 ccpu
 

Probably right...I was just elaborating on Bob C's post # 3 that mentions Service bulletin page 250 and part number A-45958.

For my pickup I just ordered glass from Bert's.....perhaps they would provide the correct dimensions.

I couldn't find any other service bulletin pages with glass dimensions.

Re: 1931 ccpu
 

Page 250 in the Service Bulletins was published in May 1928. Extreme caution should be used when referring to the sizes of glass on that page are being used for later years. Yes, refer to the Body Parts List and cross reference before using the chart for later years.

Re: 1931 ccpu
 

Like I said in my first post the part number for the glass came from the April 1, 1932
Ford Body Parts List and is for the 82-B (mid 1930-31) cab. Even though the glass
chart is from 1928 the part number should be correct.

Bob