Lug wrench starter crank extension
 

Does anyone have a source to find out the correct length of the extension for the starter crank? I have a few in different lengths that I'm trying to sort out for their correct application. I've tried several of the V-8 club books but nothing.
Thanks in advance for any leads

Re: Lug wrench starter crank extension
 

You might post the lengths (and maybe a photo) and see if anyone recognizes them. What do you think they are from as a starting point?

Charlie Stephens

Re: Lug wrench starter crank extension
 

Contact Lin Stacey, Ford tool expert.


http://flatheadtools.net/typical-tool-kits.html

Re: Lug wrench starter crank extension
 

The ford green bible lists the length for each year. Tell us your year, and I will look it up for you, if you do not have a parts manual.

Re: Lug wrench starter crank extension
 

Joe, Thanks for the heads up on the Green Book. I've made a feeble attempt to locate it there but with no success. Do you have a page or section number?

Re: Lug wrench starter crank extension
 

Tom, It's on page 627 in the green book about the middle of the page,
part number 17040.

Bob

Re: Lug wrench starter crank extension
 

And the section is Tools. I hope that you already have the correct one. It took me years to find mine. That is the fun of this hobby for me. A hard to find item, in good condition for a fair price.

Re: Lug wrench starter crank extension
 

I had the lug wrench for my '36 but never the crank extension, then one day last fall I was cleaning up in the barnyard and hit a bit of metal with my rake. I pulled up the long lost extension somewhat rusty but it has to be to my pickup as it was the first motor on this farm. Before '52 horsepower here was either 1 or 2. I will keep it, rust and all in my truck.

Bill

Re: Lug wrench starter crank extension
 

V8 Club Book for 1935-36 indicates extension is 20-3/8"

Re: Lug wrench starter crank extension
 

Bob, Bingo!! That was it. Don't know why I couldn't find it. I now have that page marked for future reference. Looks like mine is for a '32 V-8 Passenger or 33/34 Pass and Commercial. Again, Thanks to everyone for their comments and help.