Need to know the standard bore size of '28 Model A 4 Banger Hey everyone! Newest member of the Ford Barn! I'm working on a friend's '28 Model A- engine was locked up so I removed the head and oil pan. Had a broken piston. He wants to get it running fast so I'm looking for a piston. This one measures 3.885" Cylinder bore size is 3.900" Is this stock? Also will need a head if anyone can help with that.
Thanks! |
Re: Need to know the standard bore size of '28 Model A 4 Banger 3.8750 is Standard bore. 3.9050 would be .030" oversized. Hone it a tad over the .005" and you should be close if the cylinder is round. Otherwise you need a .010 piston.
|
Re: Need to know the standard bore size of '28 Model A 4 Banger BTW, welcome to Fordbarn!!
|
Re: Need to know the standard bore size of '28 Model A 4 Banger Brent is correct 3.8750 is std bore common piston over sizes today from most parts house are 0.020" 0.030 0.040" 0.060" 0.080" 0.100" 0.125"
|
Re: Need to know the standard bore size of '28 Model A 4 Banger Where are you located? It would help on the head issue.
|
Re: Need to know the standard bore size of '28 Model A 4 Banger Make sure you measure at the bottom of the cylinder ---the piston has to be fit to the smallest part of the bore
|
Re: Need to know the standard bore size of '28 Model A 4 Banger Good luck and welcome!!
|
Re: Need to know the standard bore size of '28 Model A 4 Banger Thank you everyone for the warm welcomes! And I will take more measurements in the cylinder to make sure it is true. I am located in Southern Illinois- brought the head to a machine shop, but they said it had too many hairline cracks to repair..
|
Re: Need to know the standard bore size of '28 Model A 4 Banger Quote:
They are plentiful and not expensive. I would suggest Berts in Denver for a used head that I'm sure would be in good shape. It would be a crap shoot from most other sources. |
Re: Need to know the standard bore size of '28 Model A 4 Banger I have a head I took off to install a hi-comp head. Ran good. $40.00 plus shipping from Minnesota
e-mail [email protected] |
All times are GMT -5. The time now is 10:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.