light switch and horn rod what would be the ideal lube for the horn and light switch rod on my 35 pu, so that the rod does'nt turn when the steering wheel is turned? thanks
|
Re: light switch and horn rod The rod may be bent and contacting the side of the shaft.
|
Re: light switch and horn rod I agree with 1932BB The rod is probably bent just a tad and is binding on the tube. Check it out, and don't bend the rod too much. It won't hurt anything to put a wee tad of grease on the rod where it is rubbing on the tube. Good luck and keep us posted. What about posting a picture of your 35 PU.
|
All times are GMT -5. The time now is 02:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.