Install Optima Battery in Ford case Who installs Optima batteries in Ford script reproduction cases? I have read a lot about this on Fordbarn and its time I give this a try. All help appreciated.
|
Re: Install Optima Battery in Ford case you can install a 6V Optima in a Ford V8 case. they are 1" longer than a Model A case.
I did try to figure out a way of doing just that. but failed. it would pretty neat if someone comes up with a way. |
Re: Install Optima Battery in Ford case I made my own battery tie down out of aluminum stock . I put the battery on an angle connected it to the hold down screws also used the model a square hold down . Works great.
|
Re: Install Optima Battery in Ford case Why spend that much for just a battery. Optima sure has good marketing.
|
Re: Install Optima Battery in Ford case Quote:
|
Re: Install Optima Battery in Ford case Mine is set in the tray at an angle, corner to corner, and locked in place with a frame on top.
|
Re: Install Optima Battery in Ford case |
Re: Install Optima Battery in Ford case Quote:
I have a gutted script case, the fit would be very tight, have to take a lot of structure out |
Re: Install Optima Battery in Ford case When I threw in my two cents I should have said . . "If we are refering to the optima three cell 6 volt battery . . ."
https://www.amazon.com/Optima-Batter...30807079&psc=1 |
All times are GMT -5. The time now is 02:27 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.