The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Cowl Lamp ID needed. (https://www.fordbarn.com/forum/showthread.php?t=245867)

barnstuf 06-10-2018 10:50 AM

Cowl Lamp ID needed.
 

I have two cowl lamp lenses I would like to identify.

Is a flat lens 3 5/8 inch outer edge to outer edge diameter 1932 or what ?

Is a raised center lens (convex) 2 3/4 inch outer edge to outer edge diameter 1933-34 or ?

Thanks, if my guess is right they will be available to sell.

deuce lover 06-10-2018 11:55 AM

Re: Cowl Lamp ID needed.
 

32's are convex also.Model A's are flat

barnstuf 06-13-2018 12:46 PM

Re: Cowl Lamp ID needed.
 

Thanks deuce lover. However I still need an ID on the convex lens, 2 3/4 inch diameter which must be 1932 or 1933-34 but which is it? Came from Ford dealers parts room.

deuce lover 06-13-2018 01:20 PM

Re: Cowl Lamp ID needed.
 

Most likely 32.33-34's I believe are approx 2.25"

petehoovie 06-13-2018 01:37 PM

Re: Cowl Lamp ID needed.
 

The cowl lamps on my '34 measure 3 inches including the bezel. The exposed diameter of the convex glass lens measures 2 1/2 inches. Probably a 1/4 inch of glass under the bezel....

deuce lover 06-13-2018 02:53 PM

Re: Cowl Lamp ID needed.
 

Thanks for chiming in Pete. That should give barnstuf a better idea.


All times are GMT -5. The time now is 06:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.