Horn electrical terminal connection 2 Attachment(s)
Has anyone come up with an improvement for the horn wire connection ?
The wire harness bullet ends are simply pushed into the horn terminals which are not shaped like the female bullet style connectors used elsewhere on the car. Kevin |
Re: Horn electrical terminal connection If it aint broke ...... They have been working for well over 90 years.
|
Re: Horn electrical terminal connection They are inserted into the clips from the sides, not from the bottom.
|
Re: Horn electrical terminal connection X2 on post 2.
|
Re: Horn electrical terminal connection 1 Attachment(s)
X3 on post 2
|
Re: Horn electrical terminal connection So I had the bullet end shoved into the wrong place. Thanks I will correct this.
|
Re: Horn electrical terminal connection The clip on the right looks OK but the one on the left looks gimballed up
|
All times are GMT -5. The time now is 03:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.