Weep hole Muffler I was just curious if there should be a weep hole in the muffler. Mine does not have one.
|
Re: Weep hole Muffler Mine doesn't have one either, I don't think they're supposed to. A definitive answer would be to call Aires though, they use original Ford prints to make their mufflers.
|
Re: Weep hole Muffler It wouldn't hurt to put one in, especially if you often take short trips.
|
Re: Weep hole Muffler I don't start my antique cars unless they will be driven for at least 30 minutes, and that should be enough time and heat to get rid of condensation.
Besides that, I have a stainless Aires, which won't rust out. LOL |
Re: Weep hole Muffler I'm with Jim! Back in the 70's, I used to drill a hole in the muffler of every car I had - it was a pretty standard practice amongst my friends then.
|
Re: Weep hole Muffler I had a series of Volvos in the 80's and 90's and the rear muffler would only last about 10-12 months before needing replacement from Midas. The owner of the shop always joked that I wasn't buying mufflers, I was renting them because the warranty always allowed for a free replacement. At one point, he drilled a 1/4 inch hole in one upon replacement and that muffler lasted 5 years until I sold the car.
|
Re: Weep hole Muffler My uncle had a new '57 Chevy, with dual pipes. He hardly ever drove more than 4 or 5 miles at a time, so the mufflers rotted out quickly. I suggested he put glass-packs on it, long ones to keep it quiet. That pretty much solved his problem. Glass-packs are made of thicker metal.
|
All times are GMT -5. The time now is 12:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.