Model A engine cam bearing dimension Can someone give me the model A engine block cam bearing dimension.
Cavity bore diameter. Thanks. Daren |
Re: Model A engine cam bearing dimension going from memory here but 1.560 sounds right
|
Re: Model A engine cam bearing dimension I have max clearance .003 from service bulletins
new cam diameter of 1.560 ---from bill stipe site a low mileage block that I took apart that still has machining marks has .0015 clearance with original cam that shows no wear a center cam bearing with .005 clearance has the same "open" cross section as the oil feed to the valve chamber ---- |
All times are GMT -5. The time now is 04:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.