A400 68C rubber stem bumpers
 

On the A400 and the 68C there is three rubber stem bumper on the top under the header pan ,there use to be a guy out there that made them but he does not make them anymore, I found a place that will make them for me but them have a minimum order is there anyone out there is willing to pay $5 delivered for all three,

Re: A400 68C rubber stem bumpers
 

I am if they are the same as original

Re: A400 68C rubber stem bumpers
 

I need a set.

Re: A400 68C rubber stem bumpers
 

I'm not following you. Picture? I may need some.

Re: A400 68C rubber stem bumpers
 

I will take 3 or 4 sets. Bill edstrom

Re: A400 68C rubber stem bumpers
 

Ill take at least 3 sets
tom

Re: A400 68C rubber stem bumpers
 

Jason in TX

You need some

Re: A400 68C rubber stem bumpers
 

ME TOO !!
Bruce Davis [email protected]

Re: A400 68C rubber stem bumpers
 

Hi, I will take three sets also. Jim Sinclair ( [email protected] )

Re: A400 68C rubber stem bumpers
 

I wish to have two sets. Thanks.
Skipper McAdams

Re: A400 68C rubber stem bumpers
 

Ok. I need some... Now I need to know what the heck they are and where they go!

What are "rubber stem bumpers??"

I cannot think where the go on that metal top header with the thumb screws.

Re: A400 68C rubber stem bumpers
 

Look under your top (wood) header there is the metal header piece (strip) and it has 3 holes in it.
2 on each side and one in the middle, that is where there going
They keep the top header from rubbing the top of the windshield header

Re: A400 68C rubber stem bumpers
 

Oh!! Haha. You mean those three empty holes?? Haha

YUP! I need some!

Re: A400 68C rubber stem bumpers
 

I told you so!

Re: A400 68C rubber stem bumpers
 

Put me down for 2 sets.

Re: A400 68C rubber stem bumpers
 

I'll take a couple sets.

Re: A400 68C rubber stem bumpers
 

I would like a couple of sets.

Re: A400 68C rubber stem bumpers
 

I'll take a set.

Re: A400 68C rubber stem bumpers
 

I will take 20 sets, so we have some in the future for other restorers. Had three people ask me for those just this week.

Steve Becker
Bert's Model A Center
800-321-1931

Re: A400 68C rubber stem bumpers
 

About to start on a 68C myself. I will take three sets.