The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   36 pickup dash light switch (https://www.fordbarn.com/forum/showthread.php?t=285452)

rottenron36 08-11-2020 04:21 PM

36 pickup dash light switch
 

I took my 36 pickup apart over 8 years ago. Original type wiring, gauges ect. I see on one of the wiring diagrams it shows a dash light switch. I don't remember seeing one or removing one. Did 36 pickups have one, and if so could someone enlighten me, where it is and what it looks like? Thanks Ron P.S. it's finally starting to come together.

KiWinUS 08-11-2020 04:41 PM

Re: 36 pickup dash light switch
 

No dash light switch in my original 36 pickup.
Cheers
Tony

Ideucev8 08-11-2020 04:44 PM

Re: 36 pickup dash light switch
 

Hi yes they do have a dash light switch. It mounts on the lower edge of the dash. It is a small toggle type switch with a small round shaft. There should be a larger hole with 2 small holes each side for the mounting screws. & the toggle sticks out the bottom of the dash. Both my 36 picks had them.
Phil.

rottenron36 08-11-2020 04:44 PM

Re: 36 pickup dash light switch
 

Thanks Tony, was hoping I didn't have to try to find one. Ron

35fordtn 08-11-2020 05:17 PM

Re: 36 pickup dash light switch
 

For visualization this is what they look like and are reproduced and readily available.

https://thirdgenauto.com/product/193...-light-switch/

rottenron36 08-11-2020 05:33 PM

Re: 36 pickup dash light switch
 

Thanks again to ford barners, I will be ordering one from 3rdgen. Ron

Lawson Cox 08-11-2020 11:51 PM

Re: 36 pickup dash light switch
 

Quote:

Originally Posted by 35fordtn (Post 1919177)
For visualization this is what they look like and are reproduced and readily available.

https://thirdgenauto.com/product/193...-light-switch/

Michael: The switch you allude to is not the correct 35-36 dash light switch The correct switch LEVER is one size from end to end. The swollen end or bulb end is not correct. The correct switch lever is about the size of the small straight portion of your swith lever but with no Bulb or swolen end. I can take a picture of the one on my 35 PU if you'd like to see what it looks like. I cannot post a picture on the Fordbarn no matter how hard I try. Maybe Don Rogers can chime in here with a correct picture. (FWIW it is the same switch that was used on the 34 passenger car.

35fordtn 08-11-2020 11:57 PM

Re: 36 pickup dash light switch
 

Lawson for the exacting purist you are correct the switch offered is a reproduction of the 21C switch with the only real difference being the .030” larger handle.


Sent from my iPhone using Tapatalk

KiWinUS 08-12-2020 03:39 AM

Re: 36 pickup dash light switch
 

Oops sorry Ron for the incorrect answer mine is not yet a runner just sitting as found very original solid & complete but obviously the dash light switch has been removed. Great to have learned this. My wiring is shot so I will have to ad switch on rewire.
Cheers
Tony


All times are GMT -5. The time now is 12:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.