The Ford Barn - 30/31 roadster windshield "snaps"?

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - 30/31 roadster windshield "snaps"? (https://www.fordbarn.com/forum/showthread.php?t=271091)

INVISIBLEKID

10-17-2019 08:44 PM

30/31 roadster windshield "snaps"?

Going to eliminate the "snaps" from my windshield from my roadster (frame)..... There are 5 in the windshield frame.... Do they just unscrew?
I will never be running a top, so they have to go to clean up the frame.
Advise/knowledge appreciated....... Thanks.

Mike Peters

10-17-2019 10:25 PM

Re: 30/31 roadster windshield "snaps"?

Open car windshield snaps install with a "friction" fit. You can pry them out with a screwdriver.

midgetracer

10-17-2019 11:38 PM

Re: 30/31 roadster windshield "snaps"?

They leave a large hole,about 3/8 inch. Unless of course the were an aftermarket of screw in ones. You can tell if there is a phillips head in the snap.

All times are GMT -5. The time now is 09:35 AM.