The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Late V8 (1954+) (https://www.fordbarn.com/forum/forumdisplay.php?f=5)
-   -   1955 272 carburetor rebuild (https://www.fordbarn.com/forum/showthread.php?t=268716)

David31dlxslant 08-31-2019 07:38 AM

1955 272 carburetor rebuild
 

Ok, who’s the expert at professionally rebuilding a stock original carburetor for my 55 Fairlane with a 272? Thanks

Anteek29 08-31-2019 08:55 AM

Re: 1955 272 carburetor rebuild
 

Sal Scicala...he's a forum member - and is the best!

40cpe 08-31-2019 09:08 AM

Re: 1955 272 carburetor rebuild
 

If you will indicate if it is a 2 barrel or 4 barrel it might widen your choices of rebuilders.

David31dlxslant 08-31-2019 09:18 AM

Re: 1955 272 carburetor rebuild
 

It’s a 2 barrel

40cpe 08-31-2019 09:25 AM

Re: 1955 272 carburetor rebuild
 

In addition to Sal mentioned post #2, Charlie ny is also a forum member and an expert on rebuilding the Holley 94 and 2100.
<[email protected]>

scicala 08-31-2019 09:54 AM

Re: 1955 272 carburetor rebuild
 

Yes, I can do both the Holley 4000 4 barrel carb and the Holley 2 barrel carb.


[email protected] or (586) 612-1650


Sal

Daves55Sedan 08-31-2019 10:45 PM

Re: 1955 272 carburetor rebuild
 

2 Attachment(s)
Hope you don't need to rebuild as often as I do. I'm displeased with gasket sets and power valves available. These things suck! Easy to rebuild though.

Alaska Jim 08-31-2019 10:50 PM

Re: 1955 272 carburetor rebuild
 

I have used Sal for carbs, and I have used Charlie for fuel pumps. I can say that both have done an excellent job. The carbs that Sal did for me were the 4000 series Holley 4bbl carbs., I am sure he can do just as well on a 2bbl.

scicala 09-01-2019 04:34 PM

Re: 1955 272 carburetor rebuild
 

Thank you Jim.


Sal


All times are GMT -5. The time now is 02:22 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.