1930 ccpu Could some one advise me how to get roller on window regulator into the channel on the window?
Thank you for your time. Terry aka dirt t |
Re: 1930 ccpu Terry : on my 29 (l know yours is a 30, but doubt there is much difference): I simply roll the window all the way down, grasp the roller and guide it back into the channel when I slowly roll the window up. Hopefully this answers your question, unless I misunderstood.
|
Re: 1930 ccpu I ended up removing regulator mounting screws ,connected it from the window and reinstalled regulator.
Thank you for your reply. Terry aka dirt t |
Re: 1930 ccpu That's the way that I do mine !
|
All times are GMT -5. The time now is 07:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.