Oil Pan Drain Plug Repair
 

This isn't as good as a proper repair, but could be handy to keep you going:

See bottom page - might be useful if it doesn't hit tray or crank?


Oil Drain Plug Repair
• Exclusive patented winged drain plug is used when the oil pan nut or flange is broken or missing.
• Eliminating the need to replace the pan part number 090-080 is a time and money saver for pans with 1/2" to 3/4" or 12mm to
18mm drain holes. Requires no tools to install.

Make sure threaded bolt will not contact any internal parts before installation. Bolt enters oil pan 1-7/8".
090-080

http://www.dormanproducts.com/catalo...Sec3_Part2.pdf

Re: Oil Pan Drain Plug Repair
 

Neat ! ! !

Paul in CT