PCV Valve for 292 and source for rubber valley/valve cover gaskets
 

Can anyone suggest what PCV valve& grommet set up fits in place of the draft tube in the oil valley plate. I've seen pictures on the internet-maybe a kit is available. Also-does anyone know a supplier that still supplies rubber-not cork-valve cover and oil valley cover plate gaskets. Thanks a lot.

Re: PCV Valve for 292 and source for rubber valley/valve cover gaskets
 

Grommet and PCV for a Mustang 302. Glue the grommet in, it may not fit perfectly.

Re: PCV Valve for 292 and source for rubber valley/valve cover gaskets
 

Have you checked with a local parts store on the rubber gaskets? Try a listing for a 60-64 Ford F150, 292 engine.


Also try John Mummert

Re: PCV Valve for 292 and source for rubber valley/valve cover gaskets
 

I just went down this road. O'Reillys has the Dorman grommet with the notch to fit the lip in the hole, sorry I do not have the number but I held it in my hand as I needed a thinner notch. PCV I used was Microgard PCV178, it specs out to be the closest match I could find. Both for about $7