The Ford Barn - 39 Coupe Broken Axle Removal.

Page 2 of 2

Show 40 post(s) from this thread on one page

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - 39 Coupe Broken Axle Removal. (https://www.fordbarn.com/forum/showthread.php?t=265011)

Phil Gillespie

06-20-2019 11:01 AM

Re: 39 Coupe Broken Axle Removal.

So just checking again and it would appear the inner axle seals which sit in behind the bearings are not fitted? The bearing is located in a recess at bell but the inner seal when fitted is located how? Does it just sit on the axle as there is no shoulder to locate?
Have read the Ford Bulletin and past posts and understand sharp edge to diff to retain oil.
Phil NZ

36coupe

06-21-2019 03:37 PM

Re: 39 Coupe Broken Axle Removal.

Best part of using a port-a-power is you can position yourself out of ‘the line of fire’ while spreading the spring.

ford38v8

06-21-2019 03:41 PM

Re: 39 Coupe Broken Axle Removal.

Quote:

Originally Posted by 36coupe (Post 1769909)

Best part of using a port-a-power is you can position yourself out of ‘the line of fire’ while spreading the spring.

Or you can have a cold one while you instruct your wife how to do it.

All times are GMT -5. The time now is 03:37 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page