The Ford Barn - 82-A upper quarter panel holes...

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - 82-A upper quarter panel holes... (https://www.fordbarn.com/forum/showthread.php?t=256949)

Papa's CCPU

01-01-2019 06:55 PM

82-A upper quarter panel holes...

3 Attachment(s)

Anyone know what these were for?

Cab is off a AA, late 29 thru early 30 San Francisco Plant, may have had a dump bed,...
if that's any help to determine what was attached here!

Bob C

01-01-2019 07:33 PM

Re: 82-A upper quarter panel holes...

1 Attachment(s)

Page 498 of the Service Bulletins shows how to mount a tail light in that location for a dump truck but I don't see a hole for the wire. Could also had a semafore mounted in the corner.

Bob

Papa's CCPU

01-01-2019 09:34 PM

Re: 82-A upper quarter panel holes...

Quote:

Originally Posted by Bob C (Post 1711598)

Page 498 of the Service Bulletins shows how to mount a tail light in that location for a dump truck but I don't see a hole for the wire. Could also had a semafore mounted in the corner.

Bob

Thank you Bob, I had not checked there...

The hole spacing is wider, approx 2-3/4" with two 5/8" dia holes
Holes on side of panel are 1/4"dia and 3-3/4" apart.

Would like to see how the semafore was mounted...

Bob C

01-01-2019 10:11 PM

Re: 82-A upper quarter panel holes...

1 Attachment(s)

Here you go.

All times are GMT -5. The time now is 01:38 PM.