26/27block Got one here with the knock out between ctr cylinders never removed. How exactly does one run throttle rod over to carb? Is it some kind of industrial engine? Just need to know if i have to open that up. Thnx
|
Re: 26/27block The later style carb. had the rod across the top of the engine so the hole was not necessary;http://www.mtfca.com/discus/messages/257047/293128.jpg
|
Re: 26/27block Thank you!
|
Re: 26/27block Jack I like that oiler and mount you have on the fire wall, is it possible you could post a few close ups of your set up thanks. Scott
|
Re: 26/27block Quote:
Sorry, the picture is not my car. It was just used to illustrate the carb. linkage. Jack |
Re: 26/27block the oiler is just a standard one, you can buy the base/holder from the suppliers.
|
Re: 26/27block Lang's has a conversion kit #6299CL
Don't forget to get the clamp on throttle rod leaver # 6297 |
All times are GMT -5. The time now is 04:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.