55 ford Ranch wagon/ LED question? I am thinking about replacing the 1157 tail light bulbs with led bulbs but was wondering if I need to change out the flasher too. If yes,is there any problems finding the flasher for this 55? It is already converted to a 12 volt system.
Thanks for your help. |
Re: 55 ford Ranch wagon/ LED question? It probably will work without changing the flasher. If a special flasher is needed, electronic flashers are available. Check at auto parts store........Bob L
|
Re: 55 ford Ranch wagon/ LED question? I haven't looked into this in some years. But early on with LED's you needed a different flasher, and they were a 3 wire. 3rd wire was ground, IIRC. The original wiring on my bird was a 2 wire and the flasher was in a clip by the steering column as I remember. So running the 3rd terminal to ground should solve it.
Edit. I went and looked, Jets shows them for both 2 and 3 terminals now. https://www.jegs.com/p/JEGS/JEGS-LED...72412/10002/-1 |
Re: 55 ford Ranch wagon/ LED question? Quote:
Miker........you are correct. I put them in my 12V avatar and all I did was to install the bulbs-nothing else. |
Re: 55 ford Ranch wagon/ LED question? Thanks to all for your help. I will get the parts and install them.
|
All times are GMT -5. The time now is 07:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.