The Ford Barn - Flathead 6 finned aluminum head

Page 1 of 2

Show 40 post(s) from this thread on one page

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Flathead 6 finned aluminum head (https://www.fordbarn.com/forum/showthread.php?t=255385)

toby	11-28-2018 01:54 PM

Flathead 6 finned aluminum head

1 Attachment(s)

If anyone with a 226 "H" series 6 is interested, there is a NOS Edmunds finned aluminum head on epay. Item #264049726367. Very pricey @ $5,000 or offer.

Dave Castle

11-28-2018 02:53 PM

Re: Flathead 6 finned aluminum head

Pretty sure I do not need a 5000 dollar head !!!

Tim Ayers

11-28-2018 02:56 PM

Re: Flathead 6 finned aluminum head

For $5,000, I'd use that money to ditch that 6 and buy a fully worked flat head V8. LOL!

tubman

11-28-2018 09:26 PM

Re: Flathead 6 finned aluminum head

$5000 head? I'll bet even Stormy don't get that much!:D

19Fordy

11-28-2018 09:52 PM

Re: Flathead 6 finned aluminum head

tubman: That's funny.

skidmarks

11-28-2018 10:00 PM

Re: Flathead 6 finned aluminum head

5000 no , but I wouldnt ditch any H motors

RalphM

11-28-2018 10:26 PM

Re: Flathead 6 finned aluminum head

Wow! For five grand I’d buy a blower for a V8 instead!

Tim Ayers

11-28-2018 11:18 PM

Re: Flathead 6 finned aluminum head

Quote:

Originally Posted by tubman (Post 1700581)

$5000 head? I'll bet even stormy don't get that much!:d

lol

Frank Miller

11-29-2018 08:03 AM

Re: Flathead 6 finned aluminum head

For 5 grand I'd look into casting my own. Might not be cheaper but...

51 MERC-CT

11-29-2018 08:24 AM

Re: Flathead 6 finned aluminum head

Speaking of over priced stuff on Ebay
This has been listed for at least 2 years.
The pictures seem to show a heat warped and distorted part.

https://www.ebay.com/itm/1940-Ford-D...d~3e:rk:1:pf:0

amodel25

11-29-2018 01:35 PM

Re: Flathead 6 finned aluminum head

Yeah but you get the box with it!!!!!

Dave Castle

11-29-2018 03:51 PM

Re: Flathead 6 finned aluminum head

Quote:

Originally Posted by 51 MERC-CT (Post 1700653)

Speaking of over priced stuff on Ebay
This has been listed for at least 2 years.
The pictures seem to show a heat warped and distorted part.

https://www.ebay.com/itm/1940-Ford-D...d~3e:rk:1:pf:0

So u want the seller to be honest, thats asking a lot !!

scicala

11-29-2018 05:28 PM

Re: Flathead 6 finned aluminum head

Quote:

Originally Posted by toby (Post 1700458)

If anyone with a 226 "H" series 6 is interested, there is a NOS Edmunds finned aluminum head on epay. Item #264049726367. Very pricey @ $5,000 or offer.

That EBAY item number must be wrong. I can't find the head by searching with the description either.

Sal

Jay in Mass

11-30-2018 05:51 AM

Re: Flathead 6 finned aluminum head

Quote:

Originally Posted by tubman (Post 1700581)

$5000 head? I'll bet even Stormy don't get that much!:D

Almost afraid to ask. What's storm?

Tim Ayers

11-30-2018 06:36 AM

Re: Flathead 6 finned aluminum head

Quote:

Originally Posted by Jay in Mass (Post 1700890)

Almost afraid to ask. What's storm?

Stormy Daniels

40 Deluxe

11-30-2018 11:59 AM

Re: Flathead 6 finned aluminum head

Quote:

Originally Posted by Tim Ayers (Post 1700474)

For $5,000, I'd use that money to ditch that 6 and buy a fully worked flat head V8. LOL!

Put that head on an 'M' six (the 254 cu. in. truck version) along with the other usual goodies, and you can keep up with, or even pass, that V8!

51 MERC-CT

11-30-2018 12:43 PM

Re: Flathead 6 finned aluminum head

Quote:

Originally Posted by scicala (Post 1700789)

That EBAY item number must be wrong. I can't find the head by searching with the description either.

Sal

The listing has ended, click on the ended picture if there then scroll down to see--

https://www.ebay.com/itm/RARE-EDMUND....m43663.l44720

skidmarks

11-30-2018 01:42 PM

Re: Flathead 6 finned aluminum head

Quote:

Originally Posted by 40 Deluxe (Post 1700963)

Put that head on an 'M' six (the 254 cu. in. truck version) along with the other usual goodies, and you can keep up with, or even pass, that V8!

Exactly without cracks

Ol' Ron

11-30-2018 05:42 PM

Re: Flathead 6 finned aluminum head

I had an Edmonds 6cyl head that i dragged around York and Hershey, and nobody wanted it. I was asking 100 bucks and dropped that to 75. Don't know what happened to it. Might be out in the Barn somewhere. If i can find it you can have it for a grand..

JSeery

11-30-2018 07:02 PM

Re: Flathead 6 finned aluminum head

$100 for the head and a $900 storage fee! :)

All times are GMT -5. The time now is 02:03 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page