Rear axle bolt question Are the four bolts that hold the brake backing plates to the rear axle have some sort of weird head size? Mine don't appear to be worn, but they seem like they would need a 23/32 wrench.
|
Re: Rear axle bolt question Ford used several odd-sized nuts on his cars, connecting rod nuts for one.
|
Re: Rear axle bolt question IIRC the heads are typically 3/4", the nuts are smaller, maybe 9/16".
|
Re: Rear axle bolt question the bolt heads are 3/4" a six point socket sometimes works the best. and the nuts are 5/8"
|
Re: Rear axle bolt question Quote:
All I have seen are a 3/4" hex. However if they are loaded up with paint it is difficult to get a wrench on them. Tom Endy |
All times are GMT -5. The time now is 07:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.