Rebuilding a distributor
 

I have a good housing that I bought after ours was found to be so rusted that it's only value is as a paper weight. So I am looking to buy:


Upper plate
Lower plate
Points
Condenser
Hardware pack
Rotor
Cap
Distributor body
Coil
"Wires"


I checked prices between several vendors and I have a list compiled of who has what and their costs. And from working on old cars for years and buying from some of these vendors, I see Mac's is still higher than the others. Nice to see there are some constants in the world today.



Am I missing anything?


Later!
Mr. Ed

Re: Rebuilding a distributor
 

Bushings, shaft, Stipe distributor cam, get A&L condenser.


Bob

Re: Rebuilding a distributor
 

https://www.brattons.com/distributor...ock-parts.html

Or: https://www.brattons.com/distributor...dern-part.html

Re: Rebuilding a distributor
 

Thanks for the replies.


Later!
Mr. Ed

Re: Rebuilding a distributor
 

send me your rusty paperweight! I will pay the shipping