I Need an Oil Pan Drain Plug Gasket
 

So I dug through my collection of odd's and end's and found this. It's 15/16 outer diameter, 7/8 inner diameter and 1/16 wide. Am I in luck?

Re: I Need an Oil Pan Drain Plug Gasket
 

I went to pep boys and they hooked me up with a metric one and it is working for me.

Re: I Need an Oil Pan Drain Plug Gasket
 

Looks good to me. Does it fit the drain plug?
Thought I heard that a spark plug washer would work as well?
Jeff

Re: I Need an Oil Pan Drain Plug Gasket
 

In a pinch, just rub #2 Permatex on the plug threads.
Bill W.

Re: I Need an Oil Pan Drain Plug Gasket
 

Land Rovers use the same one.

Re: I Need an Oil Pan Drain Plug Gasket
 

We found the copper one to leak, even after filing flat the pan mating surface. Used the fibre type with no leak so far and not overtightening the bolt. Perhaps a little Perm 2 as Bill suggests would help.

Re: I Need an Oil Pan Drain Plug Gasket
 

I had the same problem,would leak with the washer installed. Took it off and had no leak.

Re: I Need an Oil Pan Drain Plug Gasket
 

When you guys say fiber washer, what exactly are we talking about?

Re: I Need an Oil Pan Drain Plug Gasket
 

Re: I Need an Oil Pan Drain Plug Gasket
 

The A vendors sell them either alone or in the kits. They are a hard usually gray or black composition material, not cork. see post 9.

Re: I Need an Oil Pan Drain Plug Gasket
 

I believe the originals are the same as the Spark Plug gasket.

Re: I Need an Oil Pan Drain Plug Gasket
 

Thanks guys....