The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Napa or Timkin Part # Rear Drum Axle Seals 1939 (https://www.fordbarn.com/forum/showthread.php?t=120893)

Rustynutz52 10-21-2013 07:56 AM

Napa or Timkin Part # Rear Drum Axle Seals 1939
 

Does anyone know the Timkin # or Napa # for the rear drum axle seals on a 1939. I am looking for some USA made seals also will need the fronts if anyone has the number handy also.

Thanks Mike

Gary in La. 10-21-2013 09:37 AM

Re: Napa or Timkin Part # Rear Drum Axle Seals 1939
 

I'm showing on my old list the following:
Front- Victor 49187
National 471316
Chicago rawhide 15707

Rear - Victor 49324
National 5877
Chicago rawhide 20538

FHFD 10-21-2013 10:01 AM

Re: Napa or Timkin Part # Rear Drum Axle Seals 1939
 

'40-'48 Ford car (not sure if '39 are the same)

NAPA front #15730
NAPA rear # 20538

Unfortuneatly, I doubt even NAPA's are USA made anymore.

Rich Overton 10-21-2013 05:20 PM

Re: Napa or Timkin Part # Rear Drum Axle Seals 1939
 

As far as I know, neither NAPA nor Timken ever manufactured their own brand of seals. They either contracted National (Federal Mogul) Victor or Chicago Rawhide (O.E. Manufacturers) to supply them with their needs. In fact the last time I looked at a seal box at my local Napa store, Federal Mogul was in small print under the part number. National and Chicago Rawhide still manufacture in the U.S. Not to say that they don't manufacture some sizes in Mexico. You could call Federal Mogul in Southfield Mi. and inquire. You could also check with Joblot in Queens Village, N.Y. or Olcar Bearing in Southern Pines N.C. 910-693-3324 for any N.O.S.

Rich O.

russcc 10-21-2013 07:02 PM

Re: Napa or Timkin Part # Rear Drum Axle Seals 1939
 

If you want USA, Rich's suggestion of Olcar Bearing is a good one. George is very helpful.


All times are GMT -5. The time now is 12:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.