Transmission Main shaft bearings... What is your preference...
Assembling the Transmission Main drive gear ball bearing and the Transmission main shaft ball bearing: 1. Leaving both bearings sealed on each side; 2. Leaving both bearings sealed on one side only; 3. Using non-sealed bearings. Thanks. Pluck |
Re: Transmission Main shaft bearings... Sealed one side open to the inside of the tranny.
Joe K |
Re: Transmission Main shaft bearings... Open to inside
|
Re: Transmission Main shaft bearings... As above, retain the stock slinger behind the bearing, it also acts as a spacer.
|
All times are GMT -5. The time now is 09:40 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.