The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   37 Deluxe Coupe Seat Glide Problem (https://www.fordbarn.com/forum/showthread.php?t=291211)

Blindhuckster 12-06-2020 11:59 AM

37 Deluxe Coupe Seat Glide Problem
 

1 Attachment(s)
Trying to resolve an issue with the bench seat glides on my coupe. The seat adjuster position lock will not hold. I have them lubed up good and they slide great. When I try and engage the lock, it acts like it wants to catch on the drivers side only, but will not hold. The fabric wrapped springs are attached on both glides, but it seems to me, that I must be missing some critical part. There is no rod (which I would assume there should be to transfer the lock action from one glide to the other side. I have attached a picture of the drivers side glide. I have search the net for picture of the lock function, but come up empty. Any help would be appreciated. Thanks Nate Anello

rich b 12-06-2020 12:05 PM

Re: 37 Deluxe Coupe Seat Glide Problem
 

Don't know if your '37 is the same; but my '40 has a straight rod that goes side to side.

The ends go in a hole similar to the one in your seat track.

There are gears on the rod that engage the notches in the seat track; effectively keeping the tracks in sync.

DavidG 12-06-2020 12:16 PM

Re: 37 Deluxe Coupe Seat Glide Problem
 

A similar rod was used on '37 adjustable seats as well.

Blindhuckster 12-06-2020 12:56 PM

Re: 37 Deluxe Coupe Seat Glide Problem
 

So does anyone have that parts needed to correct this issue (rod and gears) that you would be willing to sell? Thanks Nate Anello

1937sedandelivery 12-06-2020 03:39 PM

Re: 37 Deluxe Coupe Seat Glide Problem
 

4 Attachment(s)
I don't have any spare parts, but here are some pics of my 37 bench seat.
gregg

Blindhuckster 12-06-2020 03:58 PM

Re: 37 Deluxe Coupe Seat Glide Problem
 

Gregg, Thanks so much for sending those. That is very helpful. I did find a listing for a rod with the gears on eBay for a 1947. Rod width is too wide, but thinking I can cut it down and weld it back up for the correct width. Just confirming with seller the rod diameter is 3/8". Thanks Nate

Zeke3 12-06-2020 05:19 PM

Re: 37 Deluxe Coupe Seat Glide Problem
 

4 Attachment(s)
Yes, the rod diameter is 3/8". Gregg's seat looks much better than mine. The length of the rod is around 36" and it has two 10 tooth gears on it that are about 1" in diameter. I think you could make one if necessary.

Blindhuckster 12-06-2020 05:44 PM

Re: 37 Deluxe Coupe Seat Glide Problem
 

You guys are awesome. Thank you some much to taking the time to take and upload pictures to help a guy out. Nate

35fordtn 12-06-2020 08:51 PM

Re: 37 Deluxe Coupe Seat Glide Problem
 

Nate I have a NOS Rod, but trying to find it will be the struggle.

Blindhuckster 12-06-2020 09:33 PM

Re: 37 Deluxe Coupe Seat Glide Problem
 

I know that your super busy running your parts business. If you get a chance to look for the rod and locate it, I'd gladly purchase it. I'll hold off on the Ebay seller for now. I sent you a private message as well Nate Anello


All times are GMT -5. The time now is 09:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.