Reverse eyed spring with Mitchell OD? Has anyone done this? I am working on a 35 sedan and would like it to sit just a bit lower. However the Mitchell OD doesnt look like it has too much more room over it. Just curious if I need to look at more cutting or if another approach is necessary. Thanks
|
Re: Reverse eyed spring with Mitchell OD? I have a Mitchell in my 37 with reversed springs. I made a box 1 inch higher than the tunnel for clearance. 1+ wider on both sides for side to side movement.
|
All times are GMT -5. The time now is 06:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.