Ford holley carb fuel inlet fitting
 

Look for part number or if anyone has them for sale thanks

Re: Ford holley carb fuel inlet fitting
 

Napa

Re: Ford holley carb fuel inlet fitting
 

Mike's carburetor parts has them too.

Sal

https://www.carburetor-parts.com/Bra...80_p_2408.html

Re: Ford holley carb fuel inlet fitting
 

Ok I thought they were special cause for a 94 holley carb if you look at this picture

Never to old to learn

Re: Ford holley carb fuel inlet fitting
 

Haha! I'm glad I wasn't the only who had difficulty figuring the "mystery" Holley/Ford fitting. My saga...


https://www.fordbarn.com/forum/showt...ght=Carburetor

Re: Ford holley carb fuel inlet fitting
 

The three fittings you posted a picture of, seal on the taper at the end like the original factory fuel line on earlier carbs. The fitting I supplied info on, seals with a fiber washer under the hex.

Sal

Re: Ford holley carb fuel inlet fitting
 

Ok thanks

Re: Ford holley carb fuel inlet fitting
 

Any one have a napa number the napa I have just young kids don't know what to look for thanks

Re: Ford holley carb fuel inlet fitting
 

These are repair fittings, upon a time easy to get NAPA etc.....not on the active here
in Buffalo N.Y. anymore. I'll buy a swap meet 94 if has that fitting on it. The fitting from Mikes is for a flare seal not a ferrule
Charlie ny

Re: Ford holley carb fuel inlet fitting
 

Yes I need them for a 5/16 fuel line with a flare fitting just like the one in the first picture

Re: Ford holley carb fuel inlet fitting
 

Speedway has then but they are aluminum, not brass.

Re: Ford holley carb fuel inlet fitting
 

If this is what you are looking for, this may help. It is from a Parker catalogue. At my local Napa store (Canada) they said they that deal with Fairview Fittings, but no matter, they should be able to cross reference it to the Parker P/N: 48IFHD-5-4

Re: Ford holley carb fuel inlet fitting
 

Link to catalogue.

http://www.parkerstore.jp/phj/catalo..._EN/Book-E.pdf

Re: Ford holley carb fuel inlet fitting
 

The part # 48IFHD-5-4 appears to be a male 1/4 NPT thread. 1931flathead needs the male end to be a 1/2-20 straight thread.

Sal

Re: Ford holley carb fuel inlet fitting
 

You are correct Sal. My apologies as I thought the NPT was just a reference as I know the thread for the carb is 1/2"-20. From the cross sectio pic of the fitting, it shows a straight thread and not NPT. Did some more looking and just cannot find the correct fitting, not even from the Holley website.

Re: Ford holley carb fuel inlet fitting
 

What about is using this fitting (46F-5-4), and then inserting the one I previously mentioned? A search on this reveals all sorts of "MacGyver" solutions including retapping the 1/2"-20 straight thread to a NPT.

Re: Ford holley carb fuel inlet fitting
 

No Need for apologies. We're all just trying to help.

Sal

Re: Ford holley carb fuel inlet fitting
 

https://www.summitracing.com/parts/edd-265500

This should be the one

Re: Ford holley carb fuel inlet fitting
 

I found what I needed at part store if some wants the number I have it

A 5/16 brake or fuel line will screw into it