The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   A Bob Drake Fuel pump... (https://www.fordbarn.com/forum/showthread.php?t=273998)

Mtn Wudy 12-13-2019 02:22 AM

A Bob Drake Fuel pump...
 

Are they rebuildable ...??
Or should I spring for another one ...
Different brand ....??
Mine was spraying gas out the side ....Tightened screws a little more but still wet.
I’ve had my “Fuel” problems ,,,maybe it was new pump all along ..

marko39 12-13-2019 05:34 AM

Re: A Bob Drake Fuel pump...
 

I would not try to rebuild a Drake pump as they are made offshore.(metric) there are a lot of old or Nors. Pumps which would be better canadates.

Planojc 12-13-2019 09:19 AM

Re: A Bob Drake Fuel pump...
 

Send it to Charlie NY

V8COOPMAN 12-13-2019 09:21 AM

Re: A Bob Drake Fuel pump...
 

Quote:

Originally Posted by Planojc (Post 1831144)
Send it to Charlie NY


Ask Charlie to rebuild a "REAL" pump for you. DD

Seth Swoboda 12-13-2019 09:57 AM

Re: A Bob Drake Fuel pump...
 

Quote:

Originally Posted by V8COOPMAN (Post 1831145)
Ask Charlie to rebuild a "REAL" pump for you. DD

I agree, get a real pump and have it rebuilt. I'm not sure why folks buy the reproduction pumps when there are originals that can be rebuilt and are readily available?

marko39 12-13-2019 10:20 AM

Re: A Bob Drake Fuel pump...
 

The pump I got from Drake was mounted to my engine and I noticed the fuel inlet and outlet was facing in the wrong direction. I had to remove top and reindeer it. It was a WTF moment.

35fordtn 12-13-2019 10:42 AM

Re: A Bob Drake Fuel pump...
 

Why bother you can for $75 outright buy a rebuilt original that all the parts have been replated and rebuilt using modern materials and is warrantied for five years

cas3 12-13-2019 11:38 AM

Re: A Bob Drake Fuel pump...
 

i had a new drake pump once. first, it leaked. i found the glass bowl was egg shaped and would get stuck in the pump body. fighting to get it off, it cracked the edge. when i tried to replace it with another bowl, it was an odd size. while fighting with all this i broke the poorly made bail, only to find it too is a different size than standard. give yours to someone you dont like and get a real ford pump rebuilt

Charlie ny 12-13-2019 02:33 PM

Re: A Bob Drake Fuel pump...
 

MW,
Those pumps are not rebuildable because the valves are pressed in and 90%
of the time once the old valves are removed the factory pres fit is compromised. Lot's
of us rebuild pump and pretty much use original AC, BC or Holley cores. The vintage
quality is remarkably better than the off shore stuff. For whatever it is worth I make
my own diaphragms in house and real world test every pump before shipping.
Charlie ny

Mtn Wudy 12-14-2019 01:43 AM

Re: A Bob Drake Fuel pump...
 

Thanks Guys........
If I can’t find a core,,, I’ll spring for one already rebuilt...
All summer I was blaming vapor lock ..
But it was 37 Degrees Out last Saturday night after the Christmas Parade ,,and it wouldn’t climb the hill heading back home ...Turned on the trusty elect. one to make it up.Works fine just ambling along but any load on er’ and no go...


All times are GMT -5. The time now is 10:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.