The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Brake drum removal (https://www.fordbarn.com/forum/showthread.php?t=285115)

CA Victoria 08-05-2020 10:08 AM

Brake drum removal
 

Does the proper broach cutter to cut the wheel stud have a square end or tapered?
Anyone have a part number for an off the shelf cutter?

Kurt in NJ 08-05-2020 11:26 AM

Re: Brake drum removal
 

Tapered

KR500 08-05-2020 12:10 PM

Re: Brake drum removal
 

I have had good luck using a 9/16 quality hole saw for removing the bulk of the swaged portion of metal on the brake drum. Studs push out easily after with no enlarging of stud hole in the hub.

redmodelt 08-06-2020 09:47 AM

Re: Brake drum removal
 

Unless you are trying to save the drums for some reason(?), the regular off the shelf flat/square end works just fine. Only cut deep enough to remove the riveted over part of the stud.


All times are GMT -5. The time now is 04:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.