The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Signal for a electronic speedometer (https://www.fordbarn.com/forum/showthread.php?t=283437)

wkuehnis 07-01-2020 04:28 AM

Signal for a electronic speedometer
 

Hi,
I am building a A Speedster.
I use all Gauges with the same design .
Now I need the signal for the electronic speedometer.
Does anymode have a solution?
I think, the only way is the position at the torqueTube, where the original cable driven speedometer is connected.
Here I can get the signal from a rotating cable or Pin and transfee it to a electronic signal.
Does anybody has a drawing of such a solution?

Thanks for help
Willi

rally 1 07-01-2020 05:01 AM

Re: Signal for a electronic speedometer
 

Speedhut Gauges. has a speed sensor that screws directly onto the “turtle” and drives the electronic speedometer.
The speedo that they sell is calibraitable, and very slim body. Works great in the A dash panel.
Only available in 12v, neg ground
Been using them for years.

Ken

rally 1 07-01-2020 05:07 AM

Re: Signal for a electronic speedometer
 

Followup:
speedhut # G-SNDR-11
Listed as a GM/Chrysler style, mag pulse. $50.85

wkuehnis 07-01-2020 11:39 AM

Re: Signal for a electronic speedometer
 

Great answer!

Thanks a lot
Willi
Willi

Y-Blockhead 07-01-2020 12:33 PM

Re: Signal for a electronic speedometer
 

1 Attachment(s)
Quote:

Originally Posted by rally 1 (Post 1904741)
Speedhut Gauges.
Ken

Excellent choice!!

Speedhut has a GPS speedometer also if interested in that. I have a Speedhut 2" 4000 RPM tach.


All times are GMT -5. The time now is 06:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.