The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Flathead mechanic for rebuilt ??? (https://www.fordbarn.com/forum/showthread.php?t=254225)

cuddles1 11-04-2018 12:24 PM

Flathead mechanic for rebuilt ???
 

Does anyone have information for a good to excellent rebuilt mechanic; shop or past experience? Need engine work for 49 Merc. Flathead? I am located in central Pa.--- any location close or neighboring state?? Gentlemen; I say Thank you in advance....... Dave

Tony, NY 11-04-2018 02:21 PM

Re: Flathead mechanic for rebuilt ???
 

I used a member of The Ford Barn for some engine work around 4 yrs ago. He is in the Albany,NY area. No complaints. http://www.godevilgarage.com/

Step-down 11-04-2018 06:28 PM

Re: Flathead mechanic for rebuilt ???
 

I've used Go devil also .

estout81 11-04-2018 10:08 PM

Re: Flathead mechanic for rebuilt ???
 

There is an add in the early times for Mark Moriarty in Warsaw, NY. That is probably 30 miles east of Buffalo. His phone no. is 585-786-2876. I don't know anymore than this.

A bones 11-04-2018 10:28 PM

Re: Flathead mechanic for rebuilt ???
 

I would ask this guy http://www.schwalms.com/index.htm he is in Strasburg Pa. His specialty is model 'A'.

If he does not do V8s he'll surely know where to send you.

Good Luck.

cederholm 11-05-2018 09:55 AM

Re: Flathead mechanic for rebuilt ???
 

Gary (GOFAST here on FB) is on Long Island - highly recommend.

~ Carl


All times are GMT -5. The time now is 01:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.