oil leak at center block bearing bolt Have oil leaking bearing center main bearing bolt. Any fixes without tearing it down. Sealants etc. It is not a huge leak just messy one.
Thanks |
Re: oil leak at center block bearing bolt You could try; Clean the area around the nut. Hook a vacuum cleaner hose up to the oil fill spout. With the vacuum on, work sealer around the base of the nut. With luck the vacuum will pull sealer into and voids. Other then that, it's drop the pan to fix.
This is a fix done by Model T people, and the T engine is a lot less air tight. |
Re: oil leak at center block bearing bolt Quote:
Them "old timer's" sure had the "American can do" attitude |
Re: oil leak at center block bearing bolt Remember, it's NOT a pressure leak, it's just from SPLASH & CAPILLARY wicking.
Bill Sealerguy |
All times are GMT -5. The time now is 11:37 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.