1933-1936 Rear End Widths Can anyone tell me what the overall width is, bolt flange to bolt flange, on 33-34 and also 35-36 rear banjo rear ends? Any input would be appreciated.
Thanks Dan |
Re: 1933-1936 Rear End Widths I found it.
1928-1931 57.0″ Spring Mount Eye to Eye 49.5″ 1932-1934 57.75″ --------------------------- 47.5″ 1935-1936 59.5″ ----------------------------48.25″ 1937-1941 59.5″ -----------------------------48.5″ 1942-1948 61.0″ |
Re: 1933-1936 Rear End Widths 4 Attachment(s)
Some information here.
|
Re: 1933-1936 Rear End Widths 1 Attachment(s)
thats a good article posted by jseery, every jalopy builder should have it bookmarked. mr will you havnt given us a clue what you are building yet, but on my 34 coupe i went for the 35 to 41 housing width. several reasons, its a little stronger, parts are more common, the 3/4" per side wider works out well with my 750x16's on the rear. my car is a kids jalopy from the 50's, not a restoration. a work in progress i think they call it! happy motoring, skip
|
Re: 1933-1936 Rear End Widths Quote:
|
Re: 1933-1936 Rear End Widths Quote:
I know I can make up the difference with wheel offset just wanted to verify before i ventured there. Your coupe looks great. Thanks Dan |
All times are GMT -5. The time now is 08:37 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.