The Ford Barn

The Ford Barn (
-   Late V8 (1954+) (
-   -   Rear Main (

Sanddoc 06-14-2020 07:28 AM

Rear Main

On the Y block the rear seal is held in place by 2 bolts
can you tell me what size they are and what type they are?
I have not seen that type of bolt head on any of my other cars

darrell 06-14-2020 10:07 AM

Re: Rear Main

they are special bolts.some take a 12 point socket others take an allen wrench.they are 5/16

Sanddoc 06-14-2020 10:45 AM

Re: Rear Main

thanks Darrell, I'm sure it must be a socket...


Ole Don 06-14-2020 11:04 AM

Re: Rear Main

I use a 3/8 drive 3/8 12 point deep socket. On reassembly, I use a dab of sealer on the threads because they go in to where oil lives. I also use a dab of sealer on the very end of the seal holder, and the very ends of the parts that press in the grooves.

darrell 06-14-2020 02:46 PM

Re: Rear Main

i was talking about bolt size but see you wanted socket size.

All times are GMT -5. The time now is 06:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.