Scrapping- ALL my water pump cores Many types
 

Buckets and buckets of them - NO demand. Speak up, can ship flat rate in USA. One week and they are Clean Cast scrap. Newc

Re: Scrapping- ALL my water pump cores Many types
 

If possible, list a few of what you have. Might generate interest. I know 1949-50 Merc pumps are getting hard to find.

Re: Scrapping- ALL my water pump cores Many types
 

I wish you the best. Your offer is about as good as one could possibly get.

I tried this with water pumps, starters & generators (over 125+), cylinder heads, intakes, even a number of '40 Ford radiators...all of it got scrapped.
Scrap yard gave me $5 each for the starters and generators, about $60 each for the radiators.

Re: Scrapping- ALL my water pump cores Many types
 

Gosh Kube, that's depressing. Shows that "Old is not Gold."

Re: Scrapping- ALL my water pump cores Many types
 

It kind of hurt to come face to face with the harsh reality of where this hobby that I have so thoroughly enjoyed for decades has come to.
It is just more proof that the only thing that doesn't change is the fact that everything changes.

Re: Scrapping- ALL my water pump cores Many types
 

PM sent to @Newc

Re: Scrapping- ALL my water pump cores Many types
 

Kube - I'd be interested in any 1933-1935 water pumps. Let me know if you have any and if so, we can work out something.

Dave

Re: Scrapping- ALL my water pump cores Many types
 

Sorry Dave, all gone.

Re: Scrapping- ALL my water pump cores Many types
 

If you could separate out the 32 tall pumps I am sure there is a market. Early pumps with plain pulleys without any type of reinforcement in the casting also. Early right hand pumps with nipples for heater hoses (these are all aftermarket for Ford).

Re: Scrapping- ALL my water pump cores Many types
 

Any OCM pumps would have some value since they aren't repopped. JMO

Re: Scrapping- ALL my water pump cores Many types
 

Yes, I agree. Make a quick list of what you have please.

Re: Scrapping- ALL my water pump cores Many types
 

I had a ***** block and crank kicking around for ages. I was gonna build an engine but found out what it was going to cost. A guy came through the neighborhood hood picking up scrap. It's gone. (I may have to revise my signature below...)

Re: Scrapping- ALL my water pump cores Many types
 

Your loss. Any uncracked flathead block is like gold. I am kinda known around here as the "guy with the parts", and I had a guy call me to see if I had a uncracked block. I had one that I thought was good, so I told him $800 and he could bring it back for a full refund if it was bad,. That was 5 years ago and I haven't heard back. I will agree, you can't give away good 8BA cranks, but I'm sure that will change in the future.

Re: Scrapping- ALL my water pump cores Many types
 

It seems there are a lot of us in the same boat. I have a shed full of Flathead Parts. I’ve put ads on the Internet I had one guy come he picked up a starter and a generator.
I just gave them to him.
I hate to scrap it, but then I would hate for my family to have to deal with it when I’m gone.

This picture is from about 10 years ago. There’s double the amount of parts AND a 1947 Woody in there now!

Re: Scrapping- ALL my water pump cores Many types
 

Re: Scrapping- ALL my water pump cores Many types
 

I’ve had a few parts for sale for at least half a year, and not one call. I did sell an original Ford engine fan shroud a couple years ago pretty quickly after I listed it. Guy was happy to find it and gave me CAN$50 when I was only asking CAN$40.
I see that Iron Trap Garage is buying up estate sales.

Re: Scrapping- ALL my water pump cores Many types
 

Hi, Would you have a nice, not corroded pair of 37-41 double sheave truck pumps?
Sorry i am a new member and do not meet the PM conditions yet. (NZ based but have California shipping address)
Thanks
Paul

Re: Scrapping- ALL my water pump cores Many types
 

With all you guys scraping 8ba blocks i'll take one off your hands
kurt

Re: Scrapping- ALL my water pump cores Many types
 

Just imagine all the unknown desirable parts hidden away in the stashes of Fordbarners.
Trouble is, the market is fading away as folks pass on and the once valuable goodies get tossed in the dumpster or scrapped as selling it off is an arduous task.

Re: Scrapping- ALL my water pump cores Many types
 

Latest photos- keep finding stashes of these, even with friends now. A real LOAD developing. 3 -35/36 types, 3 -Mercs found. Newc

Re: Scrapping- ALL my water pump cores Many types
 

https://www.fordbarn.com/forum/attac...6&d=1779680834

https://www.fordbarn.com/forum/attac...7&d=1779680834

https://www.fordbarn.com/forum/attac...8&d=1779680834

Re: Scrapping- ALL my water pump cores Many types
 

Nice find. "Heavy Metal" for sure that gets heavier as you get older.

Re: Scrapping- ALL my water pump cores Many types
 

Newc where are you located, i need a 40 fly wheel ?

kurt

Re: Scrapping- ALL my water pump cores Many types
 

The pair of Merc pumps you posted should be worth something and they fit in a USPS flat rate box so not all that much trouble to ship. JMO

Re: Scrapping- ALL my water pump cores Many types
 

Hi, I'm in Texas and I think I have some of the early water pumps. I will check and see and get some pics. You can have them for free for the packing/shipping. Steve 469-474-6189

Re: Scrapping- ALL my water pump cores Many types
 

Load goes to scrap on Friday AM - Medium Flat rate boxes now $25 - USPS in trouble !!!! Newc

Re: Scrapping- ALL my water pump cores Many types
 

GONE:: the price for clean cast was $120 a ton. Sold a few cores then nothing. Still kept 3 '36 types and three Mercs just incase. 700 lbs earned $40. Not that good for clean load. Newc

Re: Scrapping- ALL my water pump cores Many types
 

Thanks for offering up before you scrapped any, and for taking the time to ship the ones I got from you.

Scott in AZ

Re: Scrapping- ALL my water pump cores Many types
 

It’s unfortunate but I scrap heads intakes exhaust manifolds unrepairable blocks and more. Can’t keep it all and the value is so little it’s not worth storing as that costs also.

Re: Scrapping- ALL my water pump cores Many types
 

Sadly not only does it have to do with a decline in popularity, but it has to do with shipping prices and location also.

Re: Scrapping- ALL my water pump cores Many types
 

The shipping can definitely kill a good deal. I'd love to have a good set of EAB heads and the shipping is more than the price of the parts.

Newc sure didn't make much, if any on the parts he recently sent me. He definitely made a contribution to support the hobby before scrapping any of it. I appreciate the effort he made. It's dirty time consuming work.