Re: King Pin Reamer Needed
 

Brian

Sounds like you have one on the way
It probably won't put them exactly where they need to be but may be close
Some have recommended reaming like on a sunnen pin hone
I highly recommend this... You may want to contact some other model a or flathead v8 guys in your area . Usually someone is the machinest go to guy .

I have one and it is invaluable and necessary for getting a perfect fit
Just thought I'd throw out the fact if searching out to any old ford clubs in your area ... Heck even Chevy guys ! Did I really say that!
Larry

Re: King Pin Reamer Needed
 

Buy a brake cyl hone and hone them youtself good luck

Re: King Pin Reamer Needed
 

don,t have a regulator reamer do have an adjustable one I used to ream mine just have to be careful will gladely let you use it just let me know

Re: King Pin Reamer Needed
 

Hello Charles,
Brian and me both were able to use your reamer to Properly Ream our King Pin Bushings the Right way. THANKS!!! I have a 1928 Roadster Pickup that had an Inch of play at the top of the tire when moving it in and out while off the ground. I've never seen King Pin Bushing this loose before, ever!
I really appreciate you loaning your Reamer out to Help two Californians fix their Model A's the Right way.
THANKS AGAIN!!!

Re: King Pin Reamer Needed
 

package with bushing reamer arrived safely in today's mail. glad you guys were able to find it useful. wish i could get 'frequent flyer' miles for its cross country trip (VA-CA-VA):) best wishes for your restorations!

Re: King Pin Reamer Needed
 

Re: King Pin Reamer Needed
 

And we thank you. It was fun to borrow a tool from clear across the country. I even had to look up where Richmond VA, was since I hadn't paid much attention in History.
Now the car is wobble-free and I'm back to trying to get my carb to work properly. Always something with there cars.
Still like to see pics of your PU.