The Ford Barn - using a 12 volt system with the 6 volt horn

Page 2 of 2

Show 40 post(s) from this thread on one page

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - using a 12 volt system with the 6 volt horn (https://www.fordbarn.com/forum/showthread.php?t=284913)

fixitphil

09-09-2020 10:45 AM

Re: using a 12 volt system with the 6 volt horn

You did say insulated didn't you??

Tom Endy

09-09-2020 12:57 PM

Re: using a 12 volt system with the 6 volt horn

The wire has to be insulated. Wire used for winding transformers is solid and has an insulation coating applied. If you have an electronics supply in your area they will have it. otherwise you should be able to find it on line.

Tom Endy

All times are GMT -5. The time now is 03:44 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page