|
|
#1 |
|
Senior Member
Join Date: May 2010
Posts: 191
|
City:
lakeland
State:
fl
hi from 2 hot fl..wanted,28 ft. axel spindle,in usable condition,early 28 are round,where they bolt to backing plate..i need 2, but one will work..need,red steering wheel,r.p.u. running boards,rear fenders,..thank you..charles=fla..
)...
|
|
|
|
|
|
#2 |
|
Junior Member
Join Date: May 2010
Posts: 29
|
Hello If you still need the round front axle spindle. I do have 1 it is very nice condition no rust it is a good one.Let me know if you still need it.$15 plus postage. Thanks Richard
|
|
|
|
|
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Rock Hill, S.C.
Posts: 451
|
Here is a link to my site that has some round spindles listed. They are incorrectly priced at $75 each. They are priced at $75 for the pair. Would sell them to a Fordbarner for $60 for the pair. They are very nice and have been tumbled, degreased and cleaned and sprayed with WD 40. Shipping would be $11 USPS Flat Rate Priority. I realise there are other less expensive ones, but I have a lot of time in dissassembly, cleaning , etc.and these are particularly nice with good threads. Thanks for looking.
__________________
Uncle Bud says "too soon old, too late smart!" |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|