|
|||||||
![]() |
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
City:
Most
State:
Lower 48
Price:
0.25 a mil
Enclosed parts transport
![]() Please DO NOT post on this Thread CHECK the bottom of Page 4 to see where I am headed to next .... Sheetmetal - tires - engine - misc Engines - transmissions - differentials must be drained of all fluids and securely fastened to a pallet or a skid which must be loaded and unloaded from my trailer If I have room leftover on specific routes anchored by vehicle transport to haul parts, I will post the available space and route on this Thread .... ![]() Pick up and drop off must be along my route Jim (260) 804-6695
Last edited by trulyvintage; 03-06-2013 at 05:01 PM. |
|
|
|
|
|
#2 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 28th ![]() 28 feet available space 8000 pound capacity San Jose, CA to San Diego, CA I am leaving in the afternoon and planning on taking the I-5 down .... Jim (260) 804-6695
Last edited by trulyvintage; 04-26-2012 at 09:05 AM. |
|
|
|
|
|
#3 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 29th ![]() 10 feet of space 4000 pound capacity San Diego, CA to Springfield, OH My route is posted below Click on the link - then click on ' Get Directions ' @ http://maps.yahoo.com/#q1=San+Diego%...=4&mvt=m&trf=0 Jim (260) 804-6695 Last edited by trulyvintage; 04-26-2012 at 09:06 AM. |
|
|
|
|
|
#4 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 31st ![]() Available for hauling parts from Albuquerque, NM to Ohio ..... Jim (260) 804-6695
Last edited by trulyvintage; 04-26-2012 at 09:06 AM. |
|
|
|
|
|
#5 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
April 5th ![]() 28 feet enclosed trailer space 8000 pound capacity Dayton, OH to St. Louis, MO Room available to New York from St. Louis .... ![]() Jim (260) 804-6695 -------------------- Last edited by trulyvintage; 04-26-2012 at 09:07 AM. |
|
|
|
|
|
#6 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
April 7th ![]() Leaving the St. Louis, MO area for Long Island, NY Stopping in Dayton, OH for a few days ..... Limited room for parts hauling available 10 feet enclosed trailer space 4000 pound capacity My route @ http://maps.yahoo.com/#q1=Waterloo%2...=5&mvt=m&trf=0 Thanks .... ![]() Jim (260) 804-6695
Last edited by trulyvintage; 04-26-2012 at 09:08 AM. |
|
|
|
|
|
#7 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
April 12th ![]() Ohio to New York ..... 10 feet enclosed trailer space available 3000 pound capacity Dayton, Ohio to Syosset, New York Click on ' My Route ' then ' Get Directions ' My Route @ http://maps.yahoo.com/#q1=Dayton%2C+...=6&mvt=m&trf=0 Jim (260) 804-6695
Last edited by trulyvintage; 04-26-2012 at 09:08 AM. |
|
|
|
|
|
#8 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done ...
April 30th ![]() Click on 'My Route' then 'Get Directions' My Route @ http://maps.yahoo.com/#q1=Dayton%2C+...e%2C+NJ++07074 Enclosed transport available .... Dayton, Ohio down to Willacoochie, Georgia Then to Wilmington, North Carolina and New Jersey Up to 28 feet of room available 8000 pound capacity Jim (260) 804-6695
Last edited by trulyvintage; 05-11-2012 at 04:14 AM. |
|
|
|
|
|
#9 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
Nasty weather
![]() Leaving tomorrow - still have room if needed ![]() Jim (260) 804-6695
|
|
|
|
|
|
#10 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done ...
May 5th Dropping off in Tampa, FL .... 10 to 12 feet of enclosed transport space available to Wilmington, NC and New Jersey Need a body - sheet metal - ??? hauled Planning to head west along I-80 from New Jersey to Omaha, NE ..... You could get hauling from Tampa, FL to points along I-80 if that helps ... Making a stop in Wilmington, NC to drop off and pick up Thanks! Jim (260) 804-6695
Last edited by trulyvintage; 05-11-2012 at 04:14 AM. |
|
|
|
|
|
#11 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done ...
May 8th ![]() Enclosed parts transport available Leaving Tifton, Georgia and headed up to Wilmington, North Carolina ...... http://maps.yahoo.com/#q1=Tifton%2C+...=6&mvt=m&trf=0 Continuing up the East Coast to New Jersey 10 to 12 feet of transport space available 5000 pound capacity Thanks! Jim (260) 804-6695
Last edited by trulyvintage; 05-11-2012 at 04:13 AM. |
|
|
|
|
|
#12 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done ...
May 12th ![]() Enclosed parts transport available 10 feet of room from Wilmington, NC up the East Coast to New Jersey ..... Going thru Virginia Beach .... ![]() http://maps.yahoo.com/#q1=Wilmington...=6&mvt=m&trf=0 Jim (260) 804-6695
Last edited by trulyvintage; 05-14-2012 at 08:53 AM. |
|
|
|
|
|
#13 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done ...
Virginia Beach Anyone ? ![]() 10 to 12 feet enclosed parts hauling space available today folks Leaving Williamston, NC 27892 right now ... Passing thru Virginia Beach in a few hours .... Headed north to Barnegat, NJ 08005 & Hammonton, NJ 08037 ![]() Jim (260) 804-6695
Last edited by trulyvintage; 05-14-2012 at 08:53 AM. |
|
|
|
|
|
#14 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
May 15th ![]() Limited room to haul parts available tomorrow I even haul motorcycles ... ![]() Philadelphia, PA thru Indianapolis, IN to Edina, MO Pick up and Drop off must be along my route @ http://maps.yahoo.com/#q1=Philadelph...=5&mvt=m&trf=0 Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 11-09-2012 at 04:18 AM. |
|
|
|
|
|
#15 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
May 19th ![]() Parts hauling Parts shipping Enclosed transport available 10 to 12 feet 6000 pound capacity Kansas City, KS to Omaha, NE to Tacoma, WA http://maps.google.com/maps?saddr=Ka...mra=ls&t=m&z=5 Thanks! Jim (260) 804-6695
Last edited by trulyvintage; 05-31-2012 at 08:45 AM. |
|
|
|
|
|
#16 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
May 22nd ![]() Enclosed Model T car transport available Enclosed Model T parts transport available Leaving Grand Island, Nebraska this morning Headed west along I-80 15 feet of enclosed trailer space available 5000 pound capacity I can swing down to pick up in Denver, CO ... ![]() Call me - I am driving ..... ![]() Jim (260) 804-6695
Last edited by trulyvintage; 05-31-2012 at 08:44 AM. |
|
|
|
|
|
#17 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
June 1st ![]() Leaving Escondido, CA for New Hampshire I am taking I-40 west to Tennessee .... Limited room for enclosed parts hauling Pick up and drop off must be along my route Please check my route before you call me ... ![]() http://maps.google.com/maps?saddr=Es...mra=ls&t=m&z=4 Jim (260) 804-6695
Last edited by trulyvintage; 06-11-2012 at 03:58 PM. |
|
|
|
|
|
#18 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
June 6th ![]() Leaving Ft. Smith, Arkansas Still have room Jim (260) 804-6695
Last edited by trulyvintage; 06-11-2012 at 03:58 PM. |
|
|
|
|
|
#19 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
June 8th ![]() Enclosed parts transport available ..... Roanoke, VA to Windham, NH to Whitefield, ME Pick up and drop off must be along my route MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 06-11-2012 at 03:59 PM. |
|
|
|
|
|
#20 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
June 10th
![]() Pennsylvania to New Hampshire to Maine starts Sunday Then ..... ![]() Maine to Illinois to Michigan to New York MY ROUTE HERE 10 feet minimum enclosed transport space available 4000 pound capacity Jim (260) 804-6695
|
|
|
|
|
|
#21 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
June 12th ![]() Whitefield, Maine to Villa Park, Illinois 10 feet enclosed trailer space available 4000 pound capacity MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 08-02-2012 at 06:26 PM. |
|
|
|
|
|
#22 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
June 16th ![]() Minimum 10 feet enclosed transport space available 3000 pound capacity Villa Park, IL to Westland, MI Then from Westland, MI to Kingston, NY Then from Kingston, NY to East Setauket, NY Then from East Setauket, NY to Salisbury, NC MY ROUTE Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 08-02-2012 at 06:27 PM. |
|
|
|
|
|
#23 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
June 22nd ![]() Enclosed parts transport available Minimum 10 feet of enclosed trailer space Bath, NY east East Setauket, NY MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 06-23-2012 at 07:13 AM. |
|
|
|
|
|
#24 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
June 23rd ![]() Dropped off this nice T Chassis yesterday .... Enclosed transport space available Chassis - body - parts hauling Minimum 10 feet of room 3000 pound capacity East Setauket, NY to Salisbury, NC MY ROUTE HERE Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 07-01-2012 at 08:44 AM. |
|
|
|
|
|
#25 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
June 25th ![]() Driving the I-81 corridor from Shippensburg, PA in the morning Enclosed space available 10 to 12 feet of room 3000 pound capacity Shippensburg, PA to Salisbury, NC MY ROUTE HERE Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 07-01-2012 at 08:43 AM. |
|
|
|
|
|
#26 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
July 3rd ![]() MY ROUTE HERE Statesville, NC to Nashville, TN 28 feet available 8000 pound capacity Continuing from the Nashville, TN to Akron, OH 10 feet available 2000 pound capacity Jim (260) 804-6695 ![]() July 8th ![]() 16 feet enclosed transport space 6000 pound capacity Akron, OH to Branson, MO MY ROUTE HERE Jim (260) 804-6695 ![]() July 16th ![]() Enclosed transport available Minimum 10 feet space 2000 pound capacity Branson to Hallsville, MO to Unadilla, NY MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 08-02-2012 at 06:28 PM. |
|
|
|
|
|
#27 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
July 13th ![]() Need parts hauled ? Enclosed parts transport available 10 feet x 7 feet minimum space 3000 pound capacity Knoxville, TN to Branson, MO to Columbia, MO to Unadilla, NY MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 08-02-2012 at 06:29 PM. |
|
|
|
|
|
#28 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
July 14th thru the 20th ![]() Enclosed parts transport available from .... Kentucky to Indiana to Missouri to New York Pick up and drop off must be along my route MY ROUTE HERE Please check my route before you call me Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 08-02-2012 at 06:30 PM. |
|
|
|
|
|
#29 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
July 18th ![]() Hauling from Branson to Kansas City to New York Enclosed parts transport available 8 to 10 feet minimum MY ROUTE HERE Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 08-02-2012 at 06:30 PM. |
|
|
|
|
|
#30 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
August 3rd ![]() Limited enclosed trailer space available for parts Toledo, OH west along I-80 to Sacramento Then south along I-5 to Los Angeles, CA Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 08-11-2012 at 06:09 PM. |
|
|
|
|
|
#31 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
August 23rd ![]() Limited enclosed transport space is available Dallas, TX west to Tucson, AZ Available for vehicle transport from Tucson to the Southeast - Northeast - East Coast - Midwest Jim (260) 804-6695
Last edited by trulyvintage; 09-04-2012 at 10:02 AM. |
|
|
|
|
|
#32 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
August 16th ![]() Leaving Blythe, CA early in the morning Headed east along the I-10 thru Phoenix and Tucson, AZ Going to San Antonio and then to Dallas, TX I have at least 10 feet of enclosed trailer space 3000 pound minimum capacity From Dallas I am returning to Tucson, AZ Limited room for parts hauling available Available at this time for enclosed vehicle transport from Tucson, AZ Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 09-04-2012 at 10:03 AM. |
|
|
|
|
|
#33 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
August 23rd ![]() Leaving the Dallas, TX area for Tucson, AZ Limited enclosed trailer space available for parts - sheetmetal - axle - engine - tires Jim (260) 804-6695
Last edited by trulyvintage; 09-04-2012 at 10:03 AM. |
|
|
|
|
|
#34 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
September 5th ![]() Tucson to Phoenix, AZ Phoenix to Escondido, CA Escondido to Riverside, CA 28 feet enclosed trailer space available Up to 8000 pound capacity available September 8th ![]() Riverside, CA to Knox City, MO 10 feet enclosed trailer space available Up to 3000 pound capacity MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 09-14-2012 at 08:00 AM. |
|
|
|
|
|
#35 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
September 7th ![]() Escondido up to Riverside, CA Riverside east to Missouri via I-40 Minimum 10 feet enclosed trailer space available Jim (260) 804-6695
Last edited by trulyvintage; 09-14-2012 at 08:00 AM. |
|
|
|
|
|
#36 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
September 14th ![]() Dropping off in Knox City, Missouri ... ![]() Headed to Granger, Indiana next to pick up ... 28 feet enclosed trailer space available 8000 pound capacity MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 09-16-2012 at 08:18 PM. |
|
|
|
|
|
#37 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
September 16th ![]() Leaving Portage, IN and headed to Bakersfield, CA 10 feet enclosed trailer space available 2500 pound capacity MY ROUTE HERE Jim (260) 804-6695 ![]()
Last edited by trulyvintage; 10-06-2012 at 02:55 AM. |
|
|
|
|
|
#38 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
September 18th ![]() Leaving St. Louis, MO in the morning for Bakersfield, CA 10 feet enclosed trailer space available 2500 pound capacity MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 10-06-2012 at 02:55 AM. |
|
|
|
|
|
#39 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
October 8th ![]() Headed down to Florida on Monday ..... 10 feet enclosed trailer space available 2000 pound capacity Dayton, OH to New Port Richey, FL MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 10-13-2012 at 06:26 PM. |
|
|
|
|
|
#40 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
October 11th ![]() 10 feet enclosed trailer space 3000 pound capacity New Port Richey, FL to Henrico, VA to West Berlin, NJ I am not going thru Washington, DC ... ![]() MY ROUTE HERE I can deviate off my route slightly to pick up or drop off (If you have parts in Charlotte headed to New Jersey for example) From New Jersey, I have about 6 to 8 feet of room available right now thru Columbus, OH down to Memphis, TN Jim (260) 804-6695
Last edited by trulyvintage; 10-17-2012 at 03:59 AM. |
|
|
|
|
|
#41 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
October 11th ![]() I am leaving New Port Richey, FL for Virginia .... Jim (260) 804-6695
Last edited by trulyvintage; 10-17-2012 at 03:59 AM. |
|
|
|
|
|
#42 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
October 14th ![]() Leaving early in the morning ... 14 feet enclosed trailer space available 4000 pound capacity Walterboro, NC to Henrico, VA to West Berlin, NJ My Route Here I am not going thru Washington DC ... Jim (260) 804-6695
Last edited by trulyvintage; 10-17-2012 at 03:58 AM. |
|
|
|
|
|
#43 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
October 17th ![]() 6 x 8 feet enclosed trailer space available West Berlin, NJ down to Germantown, TN is where I am going I am not going thru Washington, DC MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 11-02-2012 at 09:41 AM. |
|
|
|
|
|
#44 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
October 22nd ![]() 10 feet enclosed transport space available Sheet metal - tires - engine - ??? 3000 pound capacity Milton, Florida up to Medina, Ohio I can take I-65 most of the way VIA I-65 I can take I-75 most of the way VIA I-75 Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 11-02-2012 at 09:40 AM. |
|
|
|
|
|
#45 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
October 23rd ![]() 10 feet enclosed trailer space available 3000 pound capacity Nashville, TN to Cleveland, OH area Leaving Nashiville around noon Taking I-65 to Louisville Then I-71 thru Cincinnati and Columbus Jim (260) 804-6695
Last edited by trulyvintage; 11-02-2012 at 09:40 AM. |
|
|
|
|
|
#46 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
Tic Tac Toe for me this month .... ![]() November Schedule Pickup in Norman, OK & drop off in Montrose, MO MY ROUTE HERE Pick up in Sonoma, CA and drop off in Gansevoort, NY MY ROUTE HERE I will have enclosed transport space available along these routes for parts ... ![]() I will have enclosed transport space available between drop off and pick up points for vehicle transport ... ![]() Jim (260) 804-6695
Last edited by trulyvintage; 01-03-2013 at 09:04 PM. |
|
|
|
|
|
#47 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
November 5th ![]() Leaving Dayton, OH for Peru and Goshen, IN MY ROUTE HERE Continuing west along I-80 with limited room for enclosed parts hauling to Grand Island, NE .... ![]() Then ..... November 10th ![]() Leaving Grand Island, NE and headed southwest to Bosque, NM Limited room for sheet metal - parts - tires - ??? I am not going thru Denver ... ![]() MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 11-15-2012 at 08:04 AM. |
|
|
|
|
|
#48 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
November 16th ![]() Should be leaving Albuquerque and heading to California ..... 8 feet x 6 feet enclosed trailer space available 3000 pound capacity Albuquerque, NM to Compton, CA MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 11-18-2012 at 08:31 AM. |
|
|
|
|
|
#49 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
November 13th Leaving from Hays, Kansas .... Limited enclosed trailer space available from Hays, Kansas down to I-25 into Albuquerque Continuing south thru Las Vegas and Albuquerque Dropping off in Bosque (just south of Albuquerque) November 16th and will have more enclosed trailer space available westbound along I-40 to Barstow and south to Compton, California 28 feet enclosed trailer space available from Compton north to Santa Rosa, California ... I am picking up in Santa Rosa and will have limited room headed cross country east along I-80 to Upstate New York Call me if you need hauling Jim at (260) 804-6695
Last edited by trulyvintage; 11-18-2012 at 08:30 AM. |
|
|
|
|
|
#50 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
November 15th ![]() I am tentatively planning to leave Albuquerque, NM for Compton, CA Limited room for parts .... Jim (260) 804-6695
Last edited by trulyvintage; 11-18-2012 at 08:30 AM. |
|
|
|
|
|
#51 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
November 25th ![]() Planning on leaving Phoenix, AZ for Compton, CA with limited enclosed trailer space to haul parts - sheetmetal - engine ... Continuing from Compton up to Santa Rosa, CA with 28 feet enclosed trailer space Limited room available from Santa Rosa eastbound on I-80 to Upstate New York Jim (260) 804-6695
Last edited by trulyvintage; 12-07-2012 at 06:49 AM. |
|
|
|
|
|
#52 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
November 28th ![]() Headed cross country .... Limited enclosed trailer space available 6 x 8 feet of room 2000 pound capacity Sonoma, CA east across I-80 to Gansevoort, NY MY ROUTE HERE Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 12-07-2012 at 06:48 AM. |
|
|
|
|
|
#53 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
December 2nd ![]() Leaving Omaha, Nebraska ...... Still have room Jim (260) 804-6695
Last edited by trulyvintage; 12-07-2012 at 06:48 AM. |
|
|
|
|
|
#54 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
December 4th ![]() Leaving Elkhart, IN for Duanesburg, NY around 9 a.m. MY ROUTE HERE December 6th ![]() Leaving Duanesburg, NY for South Easton, MA MY ROUTE HERE December 8th Leaving South Easton, NY for Centerville, IN MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 12-13-2012 at 10:35 AM. |
|
|
|
|
|
#55 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
December 7th ![]() Need parts hauling to Indianapolis, IN from Albany, NY ? Leaving Albany, NY for South Easton, MA MY ROUTE HERE Picking up a car in South Easton, continuing to Indianapolis, IN with about 10 feet of enclosed trailer space available ... ![]() MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 12-13-2012 at 10:35 AM. |
|
|
|
|
|
#56 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
December 9th ![]() Headed from Hartford to Indianapolis west along I-80 Enclosed transport available 10 to 12 feet of room w/ 3000 pound capacity Hartford, CT west to Indianapolis, IN MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 12-13-2012 at 10:34 AM. |
|
|
|
|
|
#57 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
December 27th ![]() Traveling to warmer climates ... Limited enclosed trailer space available Parts - tires - sheet metal - engine Storm Lake, IA to Anaheim, CA via I-40 Pickup and drop off must be along my route MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 01-03-2013 at 09:03 PM. |
|
|
|
|
|
#58 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
December 27th ![]() Heading out of Storm Lake, IA around noon .... ![]() Jim (260) 804-6695
Last edited by trulyvintage; 01-03-2013 at 09:03 PM. |
|
|
|
|
|
#59 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
December 30th ![]() Leaving one of my favorite Kansas towns in the morning Meade, Kansas ... Still have room to California .... ![]() MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 01-03-2013 at 09:02 PM. |
|
|
|
|
|
#60 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
January 13th Enclosed parts hauling available About 8 to 10 feet of room is what I have Williams to Sacramento to Los Angeles along I-5 MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 01-15-2013 at 08:59 AM. |
|
|
|
|
|
#61 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
January 15th ![]() Enclosed trailer space available for an engine or ??? About 8 to 10 feet of room Leaving January 15th from the Los Angeles, CA area Headed east to the Philadelphia, PA area Taking I-40 east to Oklahoma City, (OK Then I-44 thru Missouri Then I-70 pretty much the rest of the way My Route Here Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 01-24-2013 at 08:00 AM. |
|
|
|
|
|
#62 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
January 16th ![]() In Kingman this morning .... Enclosed parts hauling available About 8 to 10 feet of room available I average 400 miles a day I am starting from Kingman, AZ Headed east along I-40 thru Oklahoma City, OK Then I take I-44 up to Joplin and east to St. Louis, MO From St. Louis, I-70 pretty much the rest of the way If you need parts or an engine or tranny Tires or sheet metal or ? hauled directly along my route ... ![]() Call me ... ![]() MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 01-24-2013 at 08:01 AM. |
|
|
|
|
|
#63 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
January 22nd ![]() Headed east out of Dayton in the afternoon .... I have about 4 ft. x 4 ft. of room left from Dayton, OH to Millersville, PA MY ROUTE HERE Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 01-24-2013 at 08:07 AM. |
|
|
|
|
|
#64 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
January 29th ![]() Enclosed parts transport available Lancaster, PA to Dowington, PA to Annapolis, MD to Fruitport, MI I will be going thru Pittsburgh .... Engine - tranny - differential Tires - sheet metal - rims - ??? About 8 feet x 8 feet space available Pick up and drop off must be along my route MY ROUTE HERE Jim (260) 804-6695 ![]() __________________ Last edited by trulyvintage; 01-31-2013 at 10:51 PM. |
|
|
|
|
|
#65 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
January 29th
![]() I will be returning to Pennsylvania from Michigan Enclosed parts transport available Engine - tranny - differential Tires - sheet metal - rims - ??? About 8 feet x 8 feet space available Pick up and drop off must be along my route MY ROUTE HERE Lancaster, PA to Dowington, PA Dowington, PA to Annapolis, MD Annapolis, MD to Fruitport, MI Fruitport, MI to Westchester, PA Thanks ! Jim (260) 804-6695
|
|
|
|
|
|
#66 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
January 30th ![]() Leaving Somerset, PA this morning .... I will be going thru Pittsburgh ... ![]() Still have about 8 feet x 8 feet of room MY ROUTE HERE Jim (260) 804-6695
Last edited by trulyvintage; 01-31-2013 at 10:51 PM. |
|
|
|
|
|
#67 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
February 1st ![]() Unloading a Buda engine in Pennsylvania ... ![]() Enclosed parts hauling available 8 feet x 8 feet of room Grand Rapids, MI to Westchester, PA MY ROUTE HERE Jim (260) 804-6695 ![]() Last edited by trulyvintage; 02-15-2013 at 07:05 PM. |
|
|
|
|
|
#68 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
February 16th Enclosed room for parts available Tires - sheet metal - engine - tranny York, PA to Des Moines, IA via I-70 and I-74 MY ROUTE HERE @ http://goo.gl/maps/1lfu8 Jim (260) 804-6695 Last edited by trulyvintage; 02-21-2013 at 08:29 AM. |
|
|
|
|
|
#69 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
February 22nd ![]() Enclosed transport available from: Des Moines, Iowa up to Madison, Wisconsin Madison, Wisconsin down to Decatur, Alabama I have at least 8 feet x 8 feet of enclosed space available MY ROUTE HERE @ http://goo.gl/maps/73udQ Thanks! Jim (260) 804-6695 Last edited by trulyvintage; 03-01-2013 at 06:06 AM. |
|
|
|
|
|
#70 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
February 24th Leaving Janseville, WI for Decatur, AL this morning .... ![]() I have about 12 feet x 8 feet of room My route here @ http://goo.gl/maps/K5HOo Jim (260) 804-6695 Last edited by trulyvintage; 03-01-2013 at 06:06 AM. |
|
|
|
|
|
#71 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 1st Heading east from Decatur, Alabama around 8 a.m. 18 feet enclosed transport space available 6000 pound capacity Decatur, Alabama to Atlanta, Georgia Atlanta to Greenwood, South Carolina Greenwood to Dayton, Ohio My Route Here Jim (260) 804-6695 Last edited by trulyvintage; 03-06-2013 at 05:00 PM. |
|
|
|
|
|
#72 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 7th Leaving Findlay, OH for South Hill, VA in the morning 10 feet enclosed trailer space available Up to 1000 pound capacity Driving thru Columbus, OH and Charleston, WV My Route Here @ http://goo.gl/maps/2wDA6 Jim (260) 804-6695 Last edited by trulyvintage; 03-08-2013 at 05:53 AM. |
|
|
|
|
|
#73 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 9th ![]() Leaving South Hill, VA for Lynchburg, VA Picking up a car and headed to Oxford, IA I should have about 10 feet of room available 2000 pound capacity My Route Here Jim (260) 804-6695
Last edited by trulyvintage; 03-13-2013 at 07:12 PM. |
|
|
|
|
|
#74 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 9th ![]() Planning on leaving Natural Bridge, VA around 9 a.m. Headed west on I-64 to Dayton, Ohio Leaving Dayton, OH Monday March 11th Headed west on I-70 thru Indianapolis to I-74 Picking up I-80 into Iowa My Route here I have 10 to 12 feet of enclosed trailer space 2000 pound capacity Jim (260) 804-6695
Last edited by trulyvintage; 03-13-2013 at 07:11 PM. |
|
|
|
|
|
#75 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 14th ![]() Iowa City, IA to Granger, IN to Dayton, OH 18 feet of enclosed transport room 5000 pound capacity My Route Here Jim (260) 804-6695 ![]() Last edited by trulyvintage; 03-17-2013 at 07:41 PM. |
|
|
|
|
|
#76 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
Enclosed parts transport available from ... Ohio to New Jersey to Connecticut to New Jersey My Route Here @ http://goo.gl/maps/KqQRH March 18th North Ridgeville, OH, to Parsippany, NJ 16 feet of room available 3000 pound capacity March 21st Parsippany, NJ to Higganum CT Higganum CT to Irvington NJ 10 feet with 2000 pound capacity March 22nd Irvington NJ to any of the lower 48 states 28 feet enclosed space 7000 pound capacity Thanks! Jim (260) 804-6695 Last edited by trulyvintage; 03-23-2013 at 03:37 AM. |
|
|
|
|
|
#77 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 25th ![]() Available for a Model T or for parts transport 16 feet enclosed trailer space available 4500 pound maximum capacity Des Moines, IA west to Grass Valley, CA My Route Here Jim (260) 804-6695 ![]() Last edited by trulyvintage; 04-09-2013 at 06:33 AM. |
|
|
|
|
|
#78 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 28th ![]() I will be dropping off north of Des Moines .... Wesley, IA west to Grass Valley & Orangevale, CA Room for parts - sheet metal - engine - ? My Route Here Jim (260) 804-6695
Last edited by trulyvintage; 04-09-2013 at 06:32 AM. |
|
|
|
|
|
#79 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
March 29th ![]() I have limited room available for parts from Lexington, NE west along I-80 to Grass Valley and Orangevale, CA My Route Here Jim (260) 804-6695 ![]() Last edited by trulyvintage; 04-09-2013 at 06:32 AM. |
|
|
|
|
|
#80 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
April 11th ![]() Nothing ' funny ' about this Cheetah ...... Enclosed transport available 8 to 10 feet of room 3000 pound capacity New Haven, IN to Dayton, OH to Union WV My Route Here Jim (260) 804-6695 ![]() Last edited by trulyvintage; 05-14-2013 at 12:36 PM. |
|
|
|
|
|
#81 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
April 27th ![]() Headed down to Louisiana next ..... ![]() Enclosed transport available 10 x 7.5 feet minimum 3000 pound capacity Cart - motorcycle - atv Tires - engine - tranny - differential Sheet metal - body - ??? Pick up and drop off must be along my route Lock Haven, PA 17745 to Hamilton, NY 13346 to Avon, CT 06001 to Melville, LA 71353 My Route Here Jim (260) 804-6695 ![]() Last edited by trulyvintage; 05-14-2013 at 12:35 PM. |
|
|
|
|
|
#82 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
April 28th ![]() Still have room ..... Enclosed parts hauling available I have about 8 feet x 8 feet of room Hamilton, NY to Avon, CT to Melville, LA My Route Here Jim (260) 804-6695
Last edited by trulyvintage; 05-14-2013 at 12:35 PM. |
|
|
|
|
|
#83 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
This trip is done
May 2nd ![]() Driving from Chattanooga, TN early in the morning Headed to Atlanta, GA Then to Melville, Louisiana My Route Here 10 feet x 8 feet of enclosed space available 3000 pound capacity Limited room for an engine - parts - tires - sheet metal Jim (260) 804-6695
Last edited by trulyvintage; 05-14-2013 at 12:34 PM. |
|
|
|
|
|
#84 |
|
Senior Member
Join Date: May 2010
Location: On the road ....
Posts: 1,389
|
May 18th
![]() 10 days by the beach is enough for me ! Leaving Daytona Beach, FL Headed to Grovetown, GA Then to Greenwood, SC Ending up in Dayton, OH I have 18 feet of available space 5000 pound capacity My Route Here Jim (260) 804-6695
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|