04-19-2011, 01:33 AM
|
#1 |
|
Junior Member
Join Date: Jun 2010
Posts: 10
|
Auto Transport Available
City:
SoCal
State:
Ca
Price:
in ad
Leaving from Los Angeles or Sacramento the first week in May with empty,open trailer.Heading to NYC,Mass.and Maine.Coast to coast haul around $1300.Call Rich 562 324-3462
Last edited by woodieRich; 04-23-2011 at 10:50 PM. |
|
|
|
04-23-2011, 10:51 PM
|
#2 |
|
Junior Member
Join Date: Jun 2010
Posts: 10
|
Re: Auto Transport Available
bump
|
|
|
|
|
04-24-2011, 06:19 AM
|
#3 |
|
Member
Join Date: May 2010
Posts: 65
|
Re: Auto Transport Available
I have a wood Crackerbox Boat 15 ft long on a trailer with no motor. It's in Salt Lake City Utah. I need it delivered to Upstate NY. Drop me an e-mail if interested. Jim jehawver@gmail.com
|
|
|
|
|
04-24-2011, 01:43 PM
|
#4 |
|
Junior Member
Join Date: Jun 2010
Posts: 10
|
Re: Auto Transport Available
Jim,
So far your load is the closest to our intended route.We would need to know overall width and length of the trailer.Thanks for your interest.Rich |
|
|
|
|
04-24-2011, 04:06 PM
|
#5 |
|
Member
Join Date: May 2010
Posts: 65
|
Re: Auto Transport Available
Hi Rich, I will work on getting that for you. Here's what I know as I've had two others delivered from CA & NV. Both guys had regular car trailers. They had to take the wheels of the boat trailer as they would have hit there trailer fenders. They both put 6 by 6s under the trailer axles. The boat is at a marina and my guess is that it can be lifted and set on your trailer. I have gantries at my shop and can lift it off. What both the other guys did was pull the boat with there winches up on there trailers till the wheels came close to there fenders. Jacked the axles up and put 6 by 6s under the axle and take the wheels off the boat trailer. Then pulled the boat forward for correct tongue weight. I had one dropped in Cleveland Ohio and had to go get it with my car trailer. It took me about an hour to load it the same way. Send me an e-mail to me at jehawver@gmail.com and I'll send you a couple pictures of the boat loader on my trailer. In the mean time I'll try to get the dimensions of the trailer. Jim
|
|
|
|
|
04-25-2011, 12:50 AM
|
#6 |
|
Junior Member
Join Date: Jun 2010
Posts: 10
|
Re: Auto Transport Available
Hi Rod,
Looks like we will be on I-80 next week.We can handle the transmissions and MD is not that far out of our way. Thanks Rich |
|
|
|
|
04-27-2011, 12:39 PM
|
#7 |
|
Member
Join Date: May 2010
Posts: 65
|
Re: Auto Transport Available
Hi Rich, I just heard from the the guy in Utah. Here's the info:
The trailer measures 18 feet 5 inches long. the trailer is just under 8 feet wide, He says either 7 ft. 8 or 7ft 10 inches wide. it's Located at Peterson Marine 98 East 13800 South Draper Utah 84020 801-572-6720 ask for Mike The east coast location is 3475 Skyline Drive Penn Yan NY 14527 Both locations can lift it on and off your trailer. Wheels might have to come off and 6x6s put under axles to keep hubs clear of your trailer . Let me know if your interested in making this transport. Thanks, Jim |
|
|
|
|
04-27-2011, 09:23 PM
|
#8 |
|
Senior Member
Join Date: May 2010
Location: Northern California
Posts: 614
|
Re: Auto Transport Available
Rich-
Do you have room to get a fordor body from New York back to Sacramento, or one-way trip from west-to-east? Thanks. Bruce |
|
|
|
|
04-28-2011, 12:38 AM
|
#9 |
|
Junior Member
Join Date: Jun 2010
Posts: 10
|
Re: Auto Transport Available
Bruce,
We can use a larger trailer and have room for your body.Are the rear fenders on it? |
|
|
|
|
04-28-2011, 10:18 AM
|
#10 |
|
Senior Member
Join Date: May 2010
Location: Northern California
Posts: 614
|
Re: Auto Transport Available
Rich-
No rear fenders. PM me w/ an estimate when you have a moment. Thanks. |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 12:08 AM.