Custom Banger Header and intakes

[BCCHOPIT]

Hi every one... I wont to use this thread to post pics of custom intakes and headers I have made.
If you are looking for parts to make your own or wont me to make you a custom intake or header please PM me thanks for look-in Bill


Laser cut model A-B header 3/8 thick flanges 1.5 Ex. port 1.375IN. port
and 1.625 Ex. 1.500 In. or I can make any size

3/8 Steel Header flange $60 each
3/8 Stainless Steel Header flange $118
cut custom size ports to your size ADD $10
3/8 intake steel flanges $25 pair
3/8 intake stainless steel flanges $45 pair
3 bolt carb flanges $30 for one $50 for two





If you don't see it just ask







The last Intake I made... Thank Brent

[BCCHOPIT]

I had some guys on the HAMB ask if I could make some intake flanges that work with the stock Ex.. So I will be making a small batch of flanges If any one wont's some please PM me the more I make the cheaper the price will be.
Thanks Bill

[ajohn]

I would be a player for a single carb intake for Model A.I like your work!Will your intake work with a stock A exhaust manifold? James

[BCCHOPIT]

Originally Posted by ajohn

I would be a player for a single carb intake for Model A.I like your work!Will your intake work with a stock A exhaust manifold? James

Thanks and yes... I have two flanges one for the stock Ex. and one for the header

[bondobilly]

looking for a four into 1 header with flange and bolt on collector ready to use,have any done? how much,thanks Billy

[BCCHOPIT]

[BCCHOPIT]

Btt

[afordnut]

how much do you want for the intake or the exhaust flanges ? how much do you need for the intake manifolds ? carl 763 274 8634

[BCCHOPIT]

Originally Posted by afordnut

how much do you want for the intake or the exhaust flanges ? how much do you need for the intake manifolds ? carl 763 274 8634

PRICES are on the first post

Laser cut model A-B header 3/8 thick flanges 1.5 Ex. port 1.375IN. port
and 1.625 Ex. 1.500 In. or I can make any size

3/8 Steel Header flange $60 each
3/8 Stainless Steel Header flange $118
cut custom size ports to your size ADD $10
3/8 intake steel flanges $25 pair
3/8 intake stainless steel flanges $45 pair
3 bolt carb flanges $30 for one $50 for two

If you don't see it just ask

INTAKES are $240 and up

[BCCHOPIT]

I have been selling parts in kit form
header & intake kit $110


just the intake kit $50

[lotuselan36]

HELLO, please let me know price of a 2 stromberg manifold for a model b banger.
I will be using the snyder's split cast exhaust so i can split the pipes at the manifold.
Larry Argenian, 801-756-5620,, rosaritagold@msn.com. thanks, Larry

[BCCHOPIT]

What style - log - set up like Brents but with twin carbs. I am thinking you will need 3/4 flanges.
Thanks Bill

[BCCHOPIT]

[BCCHOPIT]

I was asked to make some cheaper thick flanges that work with the stock EX.

steel $45 a pair


As always if you don't cant find it just ask
thanks Bill

[BCCHOPIT]

one more for the list

[DickCrabtree]

I am interested in the linkage set up shown in the picture with your custom intake manifold. Can you give me some idea of the cost. I have an old intake manifold that does not have a boss on the side for linkage. I need to come up with some idea and your picture looks like a possible solution. Dick

[BCCHOPIT]

Can you send me a pic of your set up? You can PM me or Email bcchopit@aol.com
thanks Bill

[deuce5wndw]

You do nice work!!!! Dale

[b67]

Hi, Nice work. I noticed the intake with the separate runners, and I was wondering what size runners you use and how well it works on the model a engine? I have been thinking along these lines for a model t project I am doing as this seems to be the best way to keep the vaccuum signal more stable. What would you charge for an intake such as this?.....Thanks, John M.

[modelaonly.com]

I would be interested in adding these to my products, ? check out modelaonly.com] we have a lot of model a hot rodders out here in calif. also would you be interested in laser cutting other small bkts i use?