|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-23-2016, 11:03 PM | #1 |
Junior Member
Join Date: May 2016
Posts: 15
|
4-banger police head question
(Same question from HAMB, but thought you guys might be able to answer better)
My grandpa's Model A has a police head (he thinks). It is on his Model B engine. We're hoping someone can give us more information on it. Such as, who made it (was it original Ford equipment)? Does it give higher compression? Was it only available at high altitudes? What kind of horse power does it add? Thanks for any insight you can give. |
11-23-2016, 11:12 PM | #2 |
Senior Member
Join Date: Sep 2010
Location: Danville, CA
Posts: 1,554
|
Re: 4-banger police head question
I'm no expert, but I have been told they are 5.2 to one. They seem to make both my cars peppy. One is on a fresh built A )touring) engine with counter weights, full oiling and inserts, so that one should be a bit more sporty, I would believe. No history on the other engine, but it has about 10 psi higher compression than my fresh rebuilt. All hole at 94 PSI. Hope this helps you
|
Sponsored Links (Register now to hide all advertisements) |
|
11-23-2016, 11:34 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,046
|
Re: 4-banger police head question
|
11-24-2016, 02:56 PM | #4 |
Junior Member
Join Date: May 2016
Posts: 15
|
Re: 4-banger police head question
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|