04-16-2012, 04:44 PM
|
#18
|
Senior Member
Join Date: Dec 2010
Posts: 696
|
Improved Mechanical Advance Range Setting
Quote:
Originally Posted by Ronnie
The amount of total mechanical advance in degrees is achieved by the length of the advance slot as well as a bushing on the advance pin inside the dist.(shorter the slot less total advance)
|
This limits you to the few bushings you can buy plus whatever others you can turn out on your mini-lathe.
During our quest for the most flexible converted GM distributor I came up with an idea that works great. By replacing the bushing with a 4-40 setscrew, you have much greater advance range adjustment, AND you can set it anywhere you want.
|
|
|