10-22-2012, 06:47 PM | #1 |
Member
Join Date: May 2010
Location: Atlanta, GA
Posts: 66
|
Top irons
Question:
How do you replace the material in the top irons where the tacks are placed. The area is between the top iron where it curves. Is this part of the wood bows? All of the bows that I have viewed are not curved. Larry [email protected] |
10-22-2012, 06:56 PM | #2 |
Senior Member
Join Date: May 2010
Location: Auburn, MA
Posts: 2,106
|
Re: Top irons
What model?
__________________
“The technique of infamy is to start two lies at once and get people arguing heatedly over which is true.” ~ Ezra Pound |
Sponsored Links (Register now to hide all advertisements) |
|
10-22-2012, 07:47 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 1,987
|
Re: Top irons
From the description, 28-29 & 30-31 standard. It is a seperate filler not part of the bows. All the ones I have and had have a Masonite type product. There was a tthread sometime back of making your own filler with wood shavings/dust and epoxy or glue. I don't recall exactly, you could do a search and most likely find it. There is a member 28pickuppain? That used 1/4" wood strips and epoxy, his finished product looked great.
|
10-22-2012, 08:23 PM | #4 |
Member
Join Date: May 2010
Posts: 74
|
Re: Top irons
I used the thin wood strips on my '30 standard top irons and it worked well for nailing the top material.
|
10-23-2012, 01:04 AM | #5 |
Senior Member
Join Date: Sep 2010
Location: South Coast NSW Australia
Posts: 2,596
|
Re: Top irons
If Iwas to do mine again, I would cut some metal away from the outside curve and epoxy a piece of bandsawed timber in.
It is not seen, and all you need is something for nails/staples to hold. |
10-23-2012, 04:09 AM | #6 |
Senior Member
Join Date: Jan 2011
Location: New Zealand
Posts: 665
|
Re: Top irons
Sponsored Links (Register now to hide all advertisements)
__________________
R.H.D. Author of Model 'A' Ford technical manuals. Supplier of good original RHD parts. |
10-25-2012, 03:16 PM | #7 |
Member
Join Date: May 2010
Location: Atlanta, GA
Posts: 66
|
Re: Top irons
Thanks for the information:
I stopped by Home Depot and asked them for their sawdust from cutting material for their customer. They were quick to give me a bag full of sawdust, purchased some glue and I will try mixing glue and sawdust. I also picked up several five gallon paint mixing sticks. The wood is very flexible and I believe that the sticks could be cut down and forced into the irons. I will now wreck your day by sending a picture of my 1930 Model A Roadster. |
10-25-2012, 04:02 PM | #8 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Top irons
Jones,
Love a great CLASSIC street rod!! ONLY runnin' out of ICE CREAM would ruin my day. Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
10-25-2012, 08:45 PM | #9 |
Member
Join Date: Jul 2010
Location: Melbourne Australia
Posts: 95
|
Re: Top irons
I tried several ways to do this, masonite, no good, thin strips of steamed hardwood, no good, steamed pine, no good, thought about leather, spoke to a leather man, no good. Finially used builders bog (like body filler but can be nailed) filled them up saned it off and painted. I have not fitted a top to them yet but it looks like a good and easy solution.
Regards Brendan |
10-26-2012, 09:39 AM | #10 |
Senior Member
Join Date: May 2010
Location: Billerica, Ma
Posts: 461
|
Re: Top irons
I just cut long thin slices of oak 1/32 thick coated one edge with epoxy and slid it up around the curve to the middle then did the other side till the met then just kept doing that till it was was solid an the space taken up now it's solid oak inside no problem and extra support that sawdust and epoxy won't give.
|
10-26-2012, 10:43 AM | #11 |
Senior Member
Join Date: May 2010
Location: Billerica, Ma
Posts: 461
|
Re: Top irons
I just cut long thin slices of oak 1/32 thick coated one edge with epoxy and slid it up around the curve to the middle then did the other side till the met then just kept doing that till it was was solid an the space taken up now it's solid oak inside no problem and extra support that sawdust and epoxy won't give.
|
10-27-2012, 06:33 AM | #12 |
Senior Member
Join Date: May 2010
Location: Southbridge, Ma.
Posts: 1,614
|
Re: Top irons
I used a wood filler made by MINWAX on the bows of my 30 roadster. That filler soaks into the old holes and chewed up areas and accepts tacks. For major areas of missing wood I would use sawdust mixed with Kwik Poly available from LeBaron Bonney and other suppliers.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|